300-630 Exam Dumps - PDF Questions and Testing Engine
300-630 Dumps - The Sure Way To Pass Exam
What is the expense of CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)
The expense of CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA) is $250.
- Length of Examination: an hour and a half
- Format: Multiple decisions, numerous answers
- Number of Questions: 60-70
Understanding useful and specialized parts of CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)
The accompanying will be examined in CISCO 300-630 dumps:
- CISCO Endpoint Learning
- Packet Forwarding Between Leaf Switches
- CISCO Endpoint Learning Optimizations
- CISCO Endpoint Loop Protection
- Network Interface Card (NIC) Teaming to ACI Fabric
- Rogue CISCO Endpoint Control
NEW QUESTION 20
A leaf receives unicast traffic that is destined to an unknown source, and spine proxy is enabled in the corresponding bridge domain. Drag and drop the Cisco ACI forwarding operations from the left into the order the operation occurs on the right.
Answer:
Explanation:
NEW QUESTION 21
An organization deploys active-active data centers and active-standby firewalls in each data center. Which action should be taken in a Cisco ACI Multi-Pod to maintain traffic symmetry through the firewalls?
- A. Disable service node Health Tracking
- B. Enable Pod ID Aware Redirection
- C. Disable Resilient Hashing
- D. Enable Endpoint Dataplane Learning
Answer: A
Explanation:
Section: Multipod
NEW QUESTION 22
An engineer must limit local and remote endpoint learning to the bridge domain subnet. Which action should be taken inside the Cisco APIC?
- A. Enable Limit IP Learning to Subnet
- B. Enable Enforce Subnet Check
- C. Disable Endpoint Dataplane Learning
- D. Disable Remote EP Learn
Answer: B
Explanation:
Section: ACI Packet Forwarding
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739989.html
NEW QUESTION 23
Refer to the exhibit.
An engineer wants to avoid connectivity problems for the endpoint EP1 when it reaches an external L3Out network through the gateway 10.2.2.254/24. Which two configurations must be implemented in BD-BD2? (Choose two.)
- A. Enable unicast routing
- B. Enable IP data plane learning for the VRF
- C. Disable unicast routing
- D. Disable ARP flooding
- E. Enable ARP flooding
Answer: C,D
NEW QUESTION 24
What is a design implication for Cisco ACI using an application-centric approach?
- A. VLAN numbers are in the names of the bridge domain and EPG objects
- B. One EPG is mapped to multiple bridge domains
- C. One VLAN equals one EPG equals one bridge domain
- D. Multiple VLANs and/or multiple EPGs are under one bridge domain
Answer: B
NEW QUESTION 25
Refer to the exhibit.
How is the ARP request from VM1 forwarded when VM2 is not learned in the Cisco ACI fabric?
- A. Leaf 101 encapsulates the ARP request into a multicast packet that is destined to 225.0.37.192.
- B. Leaf 101 forwards the ARP request to one of the proxy VTEP spines.
- C. POD1 spine responds to the ARP request after the POD1 COOP is updated with the VM2 location.
- D. Leaf 101 switch consumes the ARP reply of VM2 to update the local endpoint table.
Answer: B
NEW QUESTION 26
What is the advantage of implementing an active-active firewall cluster that is stretched across separate pods when anycast services are configured?
- A. A cluster can be deployed in transparent mode across pods.
- B. Local traffic in a pod is load-balanced between the clustered firewalls.
- C. The local pod anycast node is preferred by the local spines.
- D. A different MAC/IP combination can be configured for the firewall in each pod.
Answer: D
NEW QUESTION 27
Refer to the exhibit.
How is the ARP request from VM1 forwarded when VM2 is not learned in the Cisco ACI fabric?
- A. Leaf 101 encapsulates the ARP request into a multicast packet that is destined to 225.0.37.192.
- B. Leaf 101 forwards the ARP request to one of the proxy VTEP spines.
- C. Leaf 101 switch consumers the ARP reply of VM2 to update the local endpoint table.
- D. POD1 spine responds to the ARP request after the POD1 COOP is updated with the VM2 location.
Answer: B
NEW QUESTION 28
How is multicast traffic managed in a Cisco ACI fabric?
- A. FTag trees are rooted at the spine nodes. Cisco APIC determines the roots.
- B. FTag trees are rooted at the spine nodes. The roots must be configured manually.
- C. FTag trees are rooted at the leaf nodes. Cisco APIC determines the roots.
- D. FTag trees are rooted at the leaf nodes. The roots must be configured manually.
Answer: A
NEW QUESTION 29 
Refer to the exhibit. How is the ARP request from VM1 forwarded when VM2 is not learned in the Cisco ACI fabric?
- A. Leaf 101 encapsulates the ARP request into a multicast packet that is destined to 225.0.37.192.
- B. Leaf 101 forwards the ARP request to one of the proxy VTEP spines.
- C. POD1 spine responds to the ARP request after the POD1 COOP is updated with the VM2 location.
- D. Leaf 101 switch consumes the ARP reply of VM2 to update the local endpoint table.
Answer: B
Explanation:
Section: ACI Packet Forwarding
NEW QUESTION 30
Which two components must be configured as stretched to establish intra-VRF communication between two EPGs that are deployed in different sites and different bridge domains? (Choose two.)
- A. EPG
- B. contract
- C. bridge domain
- D. application profile
- E. tenant
Answer: A,C
NEW QUESTION 31 
Refer to the exhibit. Drag and drop the subnets and flags from the left into the External Network Instance Profile policies on the right to create a setup that advertises only 10.10.0.0/24 and 10.10.1.0/24 prefixes in VRF1 and establishes connectivity between VRFs. Not all options are used.
Answer:
Explanation:
NEW QUESTION 32
Refer to the exhibit.
The client endpoint uses the load-balancer VIP as the destination address to send traffic to the server endpoint. If the load balancer does not do source NAT, which set of configurations must be applied on Cisco ACI to allow only the return traffic to be redirected to the service node?
- A. Create a contract linked to the common/default filter Create a L4-L7 device, function type "GoTo" Create a L4-L7 Policy-Based Redirect Policy with "Anycast Endpoint" enabled and the L3 Destination set to the load-balancer inside IP/MAC Create a service graph template that references the previously created contract and L4-L7 device Apply the service graph template. Select "L3 Destination" and reference L4-L7 Policy-Based Redirect Policy on the consumer connector only
- B. Create a contract with a filter matching "IP" only Create a L4-L7 device, function type "GoTo" Create a L4-L7 Policy-Based Redirect Policy with the L3 Destination set to the load-balancer inside IP/ MAC Create a service graph template that references the previously created contract and L4-L7 device Apply the service graph template. Select "L3 Destination" and reference L4-L7 Policy-Based Redirect Policy on the provider connector only
- C. Create a contract with a filter matching "IP" only Create a L4-L7 device, function type "GoThrough" Create a L4-L7 Policy-Based Redirect Policy with "Anycast Endpoint" enabled and the L3 Destination set to the load-balancer inside IP/MAC Create a service graph template that references the previously created contract and L4-L7 device Apply the service graph template. Select "L3 Destination" and reference L4-L7 Policy-Based Redirect Policy on the consumer and provider
- D. Create a contract linked to the common/default filter Create a L4-L7 device, function type "GoThrough" Create a L4-L7 Policy-Based Redirect Policy with the L3 Destination set to the load-balancer inside IP/ MAC Create a service graph template that references the previously created contract and L4-L7 device Apply the service graph template. Select "L3 Destination" and reference L4-L7 Policy-Based Redirect Policy on the consumer and provider connector
Answer: C
NEW QUESTION 33
A cloud provider must make a pair of firewalls available to all tenants. Each tenant defines its own service graph. Where should the Layer 4 to Layer 7 service be configured to accomplish this goal?
- A. management tenant
- B. user tenant
- C. common tenant
- D. infrastructure tenant
Answer: B
Explanation:
Section: Advanced ACI Policies and Integrations
Explanation
NEW QUESTION 34
An engineer deployed a Cisco ACI fabric and noticed that the fabric learns endpoints from subnets that are not configured on a bridge domain. To meet strict security requirements, the engineer must prevent this behavior. Which action must be taken to prevent this behavior?
- A. Implement Pervasive Gateway
- B. Activate Enable Data Plane Endpoint Learning
- C. Enable Enforce Subnet Check
- D. Configure Static Binding
Answer: C
NEW QUESTION 35
An engineer is implementing the Cisco ACI fabric but is experiencing loops detected from endpoints. When the issue was investigated, it was discovered that the packets are received with the same source IP address but from different leaf switch ports. The engineer must prevent the issue from happening in the future and make sure that the port is brought back up if it was disabled due to the loop discovered. Which set of actions must be taken to meet these requirements?
- A. Enable reverse path forwarding and set the Hold Interval
- B. Enable the enforce endpoint check and set the Rouge EP detection interval
- C. Enable the rogue endpoint and set the Error Disabled Recovery Policy
- D. Enable the remote endpoint limit and set the Interface override
Answer: C
NEW QUESTION 36 
Refer to the exhibit. Which configuration must be implemented on L3Out EBGP to advertise out of the fabric
172.16.2.0/24 network that is learned from L3Out OSPF?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 37
A cloud provider must make a pair of firewalls available to all tenants. Each tenant defines its own service graph. Where should the Layer 4 to Layer 7 service be configured to accomplish this goal?
- A. management tenant
- B. user tenant
- C. common tenant
- D. infrastructure tenant
Answer: B
NEW QUESTION 38
What is a use of the Overlay Multicast TEP in Cisco ACI Multi-Site communication?
- A. to act as the source IP for BUM traffic
- B. to establish MP-BGP adjacencies with remote spines
- C. to perform headend replication
- D. to send and receive unicast VXLAN data plane traffic
Answer: A
NEW QUESTION 39
Drag and drop the tenant implementation designs from the left onto the outcomes of the design when a greenfield Cisco ACI fabric is deployed on the right.
Answer:
Explanation:
NEW QUESTION 40
Which two actions are the Cisco best practices to configure NIC teaming load balancing for Cisco UCS B- Series blades that are connected to the Cisco ACI leaf switches? (Choose two.)
- A. Enable LACP active mode
- B. Create vPC
- C. Enable MAC pinning
- D. Create vPC+
- E. Create PAgP
Answer: A,C
NEW QUESTION 41
Refer to the exhibit.
Which two configuration steps are required in ISN for Cisco ACI Multi-Site setup? (Choose two.)
- A. Configure OSPF between spines and ISN routers
- B. Configure BIDIR-PIM throughout the ISN
- C. Enable IGMPv3 on ISN routers
- D. Connect Spine2 to ISN routers.
- E. Increase ISN MTU to support the maximum MTU that is sent by endpoints
Answer: A,C
NEW QUESTION 42
An engineer configures a new Cisco ACI Multi-Pod and must set up the link between the spine and the IPN device. Which three actions should be taken to accomplish this goal? (Choose three.)
- A. Enable BIDIR-PIM protocol
- B. Enable OSPF routing
- C. Enable DHCP relay
- D. Enable IS-IS routing
- E. Enable PIM-SM protocol
- F. Enable MP-BGP routing
Answer: A,C,F
NEW QUESTION 43
......
Difficulty in Attempting Implementing Cisco Application Centric Infrastructure â Advanced (300 - 630) Exam
Candidates test their learning and identify improvement areas with the actual exam format. The best solution is to practice with CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)Certification Practice Exam because the practice test is one of the most important elements of CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)exam study strategy in which candidates can discover their strengths and weaknesses to improve time management skills and to get an idea of the score that they can expect. PracticeDump offers the latest exam questions for the CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)Exam which can be understood by the candidates deprived of any difficulty.
Our CISCO 300-630 practice exam and CISCO 300-630 practice tests is best-suited to busy professionals who don’t have much to spend on preparation and want to pass it in a week. Our CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)practice exam has been duly prepared by the team of experts after an in-depth analysis of Cisco recommended syllabus. We update our material regularly. So, it is intended to keep candidates updated because as and when Cisco will announce any changes in the material; we will update the material right away. After practicing with our CISCO 300-630 practice exam and CISCO 300-630 practice tests, any candidate can pass CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)exam with good grades.
Pass Cisco 300-630 Exam Quickly With PracticeDump: https://www.practicedump.com/300-630_actualtests.html
300-630 Exam Questions (Updated 2021) 100% Real Question Answers: https://drive.google.com/open?id=1ImNmiqQccY7tfT8cbGcGMBwNn1YBsn9h