Accurate Hot Selling API-936 Exam Dumps 2024 Newly Released
Get 100% Authentic API API-936 Dumps with Correct Answers
NEW QUESTION # 46
1 solid black is the color of the stripe for the alloy material
- A. 304L
- B. 0
- C. 1
- D. None of the above
Answer: C
NEW QUESTION # 47
A high alumina mineral usually consists of rounded concretionary grains embedded in clay-like mass and is believed to consist essentially of alumina trihydrate (Al2O3 H2O) and alumina hydrate (Al2O3 H2O) in varying proportions is called
- A. fused alumina
- B. kyanite
- C. alusite
- D. bauxite
Answer: D
NEW QUESTION # 48
API 936 documentation should content
- A. Execution details
- B. All above
- C. Design details
- D. Quality standards
Answer: B
NEW QUESTION # 49
The color of stripe for Inconel 600 alloy material of metallic anchor is
- A. 1 solid black
- B. 2 solid black
- C. None of the above
- D. 2 solid blue
Answer: D
NEW QUESTION # 50
Metallic anchor made from rod or bar and usually used for dual layer linings that are configured in
- A. All of the above
- B. U shape
- C. V shape
- D. Y shape
Answer: D
NEW QUESTION # 51
Commercially on calcined basis bauxite must contain at least
- A. 65% fused silica
- B. 65% alumina
- C. 60% alumina
- D. None of the above
Answer: B
NEW QUESTION # 52
Materials having refractory properties which form a refractory body when bonded into a conglomerate mass by a matrix is called
- A. Refractory aggregate
- B. Refractory mass
- C. None of the above
- D. Cementitious concrete
Answer: A
NEW QUESTION # 53
The vessel in which coke and residual hydrocarbons are burned off the catalyst and the flue gas is then separated from the catalyst is called
- A. Cyclones of FCCU
- B. Regenerator of FCCU
- C. None of the above
- D. Reactor of FCCU
Answer: B
NEW QUESTION # 54
The vessel in which cracking reaction occurs or is completed and product gases are separated from coke and/or catalyst particulate is called
- A. Cyclones of FCCU
- B. Regenerator of FCCU
- C. Reactor of FCCU
- D. None of the above
Answer: C
NEW QUESTION # 55
The vessel downstream of the reactor used to separate different product fractions is called
- A. Standpipe of FCCU
- B. Fractionator of FCCU
- C. Transfer line of FCCU
- D. None of the above
Answer: B
NEW QUESTION # 56
Additives used to facilitate moisture removal of refractory linings during dry out are called
- A. Organic fiber
- B. Metal fiber
- C. Mineral fiber
- D. None of the above
Answer: A
NEW QUESTION # 57
The standard test method for abrasion resistance of refractory materials at room temperature is
- A. C 133 - 97
- B. C 704 - 01
- C. None of the above
- D. C 181 - 91
Answer: B
NEW QUESTION # 58
Section of transfer line in which flow is in an upward direction is called
- A. Plenum of FCCU
- B. Riser of FCCU
- C. Cyclone of FCCU
- D. None of the above
Answer: B
NEW QUESTION # 59
Refractory failure mechanisms are.
- A. All of the above
- B. Erosion and corrosion
- C. Overheating and chemical attack
- D. Thermal shock and mechanical abuse
Answer: A
NEW QUESTION # 60
Fiber concentrations typically range is
- A. 1 - 2 wt percent
- B. 1 - 4 wt percent
- C. 1 - 3 wt percent
- D. Any of the above
Answer: B
NEW QUESTION # 61
The formation of slag takes place by chemical action and fusion at furnace operating temperature in the way of
- A. All of the above
- B. In smelting operation, through the combination of a flux, such as limestone, with the gangue or waste portion of the ore
- C. In the refining of metals by substances such as lime added for the purpose of affecting or aiding the refining
- D. By chemical reaction between refractories and fluxing agents such as coal ash, or between two different types of refractories
Answer: B
NEW QUESTION # 62
......
API-936 (Refractory Personnel) Exam is an internationally recognized certification program designed for professionals who work in the field of refractory installation and inspection. The API-936 certification validates the knowledge and skillset of refractory personnel in the areas of installation, inspection, testing, and repair of refractory materials in high-temperature industrial settings. Refractory Personnel certification is issued by the American Petroleum Institute (API) and is widely accepted in the oil and gas industry.
Dumps of API-936 Cover all the requirements of the Real Exam: https://www.practicedump.com/API-936_actualtests.html
New Training Course API-936 Tutorial Preparation Guide: https://drive.google.com/open?id=1R8sjJiUc_ns3haOpZcXADayt2HqYALLd