Best Value Available! 2024 Realistic Verified Free NSE7_EFW-7.0 Exam Questions
Pass Your Exam Easily! NSE7_EFW-7.0 Real Question Answers Updated
Fortinet NSE7_EFW-7.0 certification is an excellent choice for network security professionals who want to enhance their knowledge and skills in the field of network security. Fortinet NSE 7 - Enterprise Firewall 7.0 certification is ideal for security professionals, network administrators, network engineers, and security consultants who work with Fortinet products and solutions. Fortinet NSE 7 - Enterprise Firewall 7.0 certification offers a competitive advantage in the job market and demonstrates to employers that the certified individual has the knowledge and skills to design, implement, and troubleshoot complex network security solutions.
NEW QUESTION # 49
Which of the following statements is true regarding a FortiGate configured as an explicit web proxy?
- A. FortiGate limits the number of simultaneous sessions per explicit web proxy user. This limit CANNOT be modified by the administrator.
- B. FortiGate limits the number of workstations that authenticate using the same web proxy user credentials. This limit CANNOT be modified by the administrator.
- C. FortiGate limits the total number of simultaneous explicit web proxy users.
- D. FortiGate limits the number of simultaneous sessions per explicit web proxy user The limit CAN be modified by the administrator
Answer: C
NEW QUESTION # 50
Examine the output of the 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. BGP peer 10.200.3.1 has never been down since the BGP counters were cleared.
- B. BGP state of the peer 10.125.0.60 is Established.
- C. Local BGP peer has not received an OpenConfirm from 10.200.3.1.
- D. The local BGP peer has received a total of 3 BGP prefixes.
Answer: B,C
NEW QUESTION # 51
Which two statements about the Security Fabric are true? (Choose two.)
- A. Branch FortiGate devices must be configured first.
- B. Only the root FortiGate collects network information and forwards it to FortiAnalyzer.
- C. FortiGate uses FortiTelemetry protocol to communicate with FortiAnalyzer.
- D. All FortiGate devices in the Security Fabric must have bidirectional FortiTelemetry connectivity.
Answer: B,D
NEW QUESTION # 52
Which two statements about an auxiliary session are true? (Choose two.)
- A. With the auxiliary session setting disabled, for each traffic path, FortiGate will use the same auxiliary session.
- B. With the auxiliary session setting enabled, ECMP traffic is accelerated to the NP6 processor.
- C. With the auxiliary session setting enabled, two sessions will be created in case of routing change.
- D. With the auxiliary session disabled, only auxiliary sessions will be offloaded.
Answer: A,D
NEW QUESTION # 53
Refer to the exhibit, which shows the output of a BGP debug command.
What can be concluded about the router in this scenario?
- A. The router 100.64.3.1 needs to update the local AS number in its BGP configuration in order to bring up the BGP session with the local router.
- B. All of the neighbors displayed are part of a single BGP configuration on the local router with the neighbor-range set to a value of 4.
- C. The BGP session with peer 10.127.0.75 is up.
- D. The State/PfxRcd for neighbor 100.64.3.1 will not change until an administrator on the local router adjusts the inbound route filtering so that prefixes received can be added to the RIB.
Answer: C
NEW QUESTION # 54
An LDAP user cannot authenticate against a FortiGate device.
Examine the real time debug output shown in the exhibit when the user attempted the authentication; then answer the question below.
Based on the output in the exhibit, what can cause this authentication problem?
- A. The FortiGate has been configured with the wrong authentication schema.
- B. User student is using a wrong password.
- C. User student is not found in the LDAP server.
- D. The FortiGate has been configured with the wrong password for the LDAP administrator.
Answer: C
NEW QUESTION # 55
Refer to the exhibit, which contains partial output from an IKE real-time debug.
Based on the debug output, which phase 1 setting is enabled in the configuration of this VPN?
- A. auto-discovery-receiver
- B. auto-discovery-shortcut
- C. auto-discovery-sender
- D. auto-discovery-forwarder
Answer: A
NEW QUESTION # 56
Refer to the exhibit, which contains the output of diagnose sys session list.
If the HA ID for the primary unit is zero (0), which statement about the output is true?
- A. The master unit is processing this traffic.
- B. This session is for HA heartbeat traffic.
- C. This session cannot be synced with the slave unit.
- D. The inspection of this session has been offloaded to the slave unit.
Answer: A
NEW QUESTION # 57
View the exhibit, which contains the output of diagnose sys session list, and then answer the question below.
If the HA ID for the primary unit is zero (0), which statement is correct regarding the output?
- A. This session is synced with the slave unit.
- B. This session is for HA heartbeat traffic.
- C. This session cannot be synced with the slave unit.
- D. The inspection of this session has been offloaded to the slave unit.
Answer: A
NEW QUESTION # 58
An administrator has configured two FortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device.
What can the administrator do to fix this problem?
- A. Configure set send-garp-on-failover enable under config system ha on both cluster members.
- B. Configure remote link monitoring to detect an issue in the forwarding path.
- C. Configure set link-failed-signal enable under config system ha on both cluster members.
- D. Verify that the speed and duplex settings match between the FortiGate interfaces and the connected switch ports.
Answer: C
Explanation:
Virtual MAC Address and Failover - The new primary broadcasts Gratuitous ARP packets to notify the network that each virtual MAC is now reachable through a different switch port. - Some high-end switches might not clear their MAC table correctly after a failover - Solution: Force former primary to shut down all its interfaces for one second when the failover happens (excluding heartbeat and reserved management interfaces): #Config system ha set link-failed-signal enable end - This simulates a link failure that clears the related entries from MAC table of the switches.
NEW QUESTION # 59
Refer to the exhibit, which contains a TCL script configuration on FortiManager.
An administrator has configured the TCL script on FortiManager, but the TCL script failed to apply any changes to the managed device after being run.
Why did the TCL script fail to make any changes to the managed device?
- A. The TCL script must start with tinclude <>.
- B. Changes to an interface configuration can be made only by a CLI script.
- C. Incomplete commands are ignored in TCL scripts.
- D. The TCL command run_cmd has not been created.
Answer: D
Explanation:
https://docs.fortinet.com/document/fortimanager/7.2.2/administration-guide/914165/tcl-scripts
NEW QUESTION # 60
Examine the following partial output from two system debug commands; then answer the question below.
Which of the following statements are true regarding the above outputs? (Choose two.)
- A. The Cached value is always the Active value plus the Inactive value
- B. The unit is in kernel conserve mode
- C. Kernel indirectly accesses the low memory (LowTotal) through memory paging
- D. The unit is running a 32-bit FortiOS
Answer: A,D
NEW QUESTION # 61
An administrator has enabled HA session synchronization in a HA cluster with two members. Which flag is added to a primary unit's session to indicate that it has been synchronized to the secondary unit?
- A. synced
- B. nds.
- C. redir.
- D. dirty.
Answer: A
Explanation:
The synced sessions have the 'synced' flag. The command 'diag sys session list' can be used to see the sessions on the member, with the associated flags.
NEW QUESTION # 62
Refer to the exhibit, which contains a CLI script configuration on FortiManager.
An administrator configured the CLI script on FortiManager, but the script failed to apply any changes to the managed device after being executed.
What are two reasons why the script did not make any changes to the managed device? (Choose two.)
- A. Incomplete commands can cause CLI scripts to fail.
- B. Static routes can be added using only TCL scripts.
- C. CLI scripts must start with #!.
- D. The commands that start with the # sign did not run.
Answer: A,D
Explanation:
ref CLI scripts do not include Tool Command Language (Tcl) commands, and the first line of the script is not "#!" as it is for Tcl scripts. https://help.fortinet.com/fmgr/50hlp/56/5-6-1/FortiManager_Admin_Guide/1000_Device%20Manager/2400_Scripts/1000_Script%20samples/0200_CLI%20scripts+.htm
NEW QUESTION # 63
Examine the output of the 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. BGP peer 10.200.3.1 has never been down since the BGP counters were cleared.
- B. BGP state of the peer 10.125.0.60 is Established.
- C. Local BGP peer has not received an OpenConfirm from 10.200.3.1.
- D. The local BGP peer has received a total of 3 BGP prefixes.
Answer: B,C
NEW QUESTION # 64
A corporate network allows Internet Access to FSSO users only. The FSSO user student does not have Internet access after successfully logged into the Windows AD network. The output of the 'diagnose debug authd fsso list' command does not show student as an active FSSO user. Other FSSO users can access the Internet without problems. What should the administrator check? (Choose two.)
- A. The user student must belong to one or more of the monitored user groups.
- B. At least one of the student's user groups must be allowed by a FortiGate firewall policy.
- C. The user student must not be listed in the CA's ignore user list.
- D. The student workstation's IP subnet must be listed in the CA's trusted list.
Answer: B,C
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD38828
NEW QUESTION # 65
View the exhibit, which contains the partial output of a diagnose command, and then answer the question below.
Based on the output, which of the following statements is correct?
- A. Quick mode selectors are disabled.
- B. Anti-reply is enabled.
- C. Remote gateway IP is 10.200.5.1.
- D. DPD is disabled.
Answer: B
NEW QUESTION # 66
......
Fortinet NSE7_EFW-7.0 Certification Exam is a challenging exam that requires candidates to have a solid understanding of network security principles and technologies. NSE7_EFW-7.0 exam consists of 60 multiple-choice questions that must be completed within 120 minutes. To pass the exam, candidates must score at least 70%.
Actual Questions Answers Pass With Real NSE7_EFW-7.0 Exam Dumps: https://www.practicedump.com/NSE7_EFW-7.0_actualtests.html
NSE7_EFW-7.0 Dumps Prepare Your Exam With 165 Questions: https://drive.google.com/open?id=1cC14g261Gi0lOpq8eZUrYHgkz1HA4IYw