Changing the Concept of NSE5_FSM-5.2 Exam Preparation 2023
Getting NSE5_FSM-5.2 Certification Made Easy! Get professional help from our NSE5_FSM-5.2 Dumps PDF
NEW QUESTION # 16
If an incident's status is Cleared, what does this mean?
- A. A clear condition set on a rule was satisfied.
- B. Two hours have passed since the incident occurred and the incident has not reoccurred.
- C. The incident was cleared by an operator.
- D. A security rule issue has been resolved.
Answer: A
NEW QUESTION # 17
Which command displays the Linux agent status?
- A. Service Ao-linux-agent status
- B. Service linux-agent status
- C. Service fsm-linux-agent status
- D. Service fortisiem-linux-agent status
Answer: D
NEW QUESTION # 18
Refer to the exhibit.
An administrator is trying to identify an issue using an expression bated on the Expression Builder settings shown in the exhibit however, the error message shown in the exhibit indicates that the expression is invalid.
Which is the correct expression?
- A. Matched Events(COUNT)
- B. COUNT(Matched Events)
- C. (COUNT) Matched Events
- D. Matched Events COUNT()
Answer: B
NEW QUESTION # 19
What is the best discovery scan option for a network environment where ping is disabled on all network devices?
- A. Smart scan
- B. L2 scan
- C. CMDB scan
- D. Range scan
Answer: A
NEW QUESTION # 20
What is a prerequisite for FortiSIEM Linux agent installation?
- A. Both the web server and the audit service must be installed on the Linux server being monitored
- B. The Linux agent manager server must be installed.
- C. The web server must be installed on the Linux server being monitored
- D. The auditd service must be installed on the Linux server being monitored
Answer: A
NEW QUESTION # 21
Which item is required to register a FortiSIEM appliance license?
- A. Static storage
- B. Static IP address
- C. Static Hardware ID
- D. Static MAC address
Answer: C
NEW QUESTION # 22
What is a prerequisite for a FortiSIEM supervisor with a worker deployment, using the proprietary flat file database?
- A. The \archive mount must be on a local disk
- B. The CMDB database must be on NFS
- C. The event database must be on a local disk
- D. The event database must be on NFS
Answer: D
NEW QUESTION # 23
Refer to the exhibit.
The FortiSIEM administrator is examining events for two devices to investigate an issue However, the administrator is not getting any results from their search.
Based on the selected fillers shown in the exhibit, why is the search returning no results?
- A. An invalid IP subnet is typed in the Value column
- B. The wrong option is selected in the Operator column
- C. Parenthesis are missing
- D. The wrong boolean operator is selected in the Next column
Answer: D
NEW QUESTION # 24
Refer to the exhibit.
How was the FortiGate device discovered by FortiSIEM?
- A. Through GUI log discovery
- B. Through auto log discovery
- C. Using the pull events method
- D. Through syslog discovery
Answer: A
NEW QUESTION # 25
Which process converts Raw log data to structured data?
- A. Data enrichment
- B. Data validation
- C. Data classification
- D. Data parsing
Answer: B
NEW QUESTION # 26
Refer to the exhibit.
Three events are collected over a 10-minutc time period from two servers Server A and Server B.
Based on the settings being used for the rule subpattern. how many incidents will the servers generate?
- A. Server A will not generate any incidents and Server B will not generate any incidents
- B. Server B will generate one incident and Server A will not generate any incidents
- C. Server A will generate one incident and Server B wifl generate one incident
- D. Server A will generate one incident and Server B will not generate any incidents
Answer: A
NEW QUESTION # 27
Which FortiSIEM components can do performance availability and performance monitoring?
- A. Supervisor, worker, and collector
- B. Supervisor only
- C. Collectors only
- D. Supervisor and workers only
Answer: A
NEW QUESTION # 28
Which discovery scan type is prone to miss a device, if the device is quiet and the entry foe that device is not present in the ARP table of adjacent devices?
- A. Smart scan
- B. L2 scan
- C. CMDB scan
- D. Range scan
Answer: A
NEW QUESTION # 29
Refer to the exhibit.
A FortiSIEM is continuously receiving syslog events from a FortiGate firewall The FortiSlfcM administrator is trying to search the raw event logs for the last two hours that contain the keyword tcp . However, the administrator is getting no results from the search.
Based on the selected filters shown in the exhibit, why are there no search results?
- A. In the Time section, the administrator selected the Relative Last option, and in the drop-down lists, selected 2 and Hours as the lime period The time period should be 24 hours.
- B. The administrator selected - in the Operator column That a the wrong operator.
- C. The keyword is case sensitive Instead of typing TCP in the Value field. the administrator should type tcp.
- D. The administrator selected AND in the Next drop-down list. This is the wrong boolean operator.
Answer: B
NEW QUESTION # 30
What are the four possible incident status values?
- A. Active, cleared, cleared manually, system cleared
- B. Active, closed, manual, resolved
- C. Active, auto cleared, manual, false positive
- D. Active, dosed, cleared, open
Answer: B
NEW QUESTION # 31
What are the minimum memory requirements for the FortiSIEM supervisor virtual appliance, when the proprietary flat file database is used?
- A. 24GB RAM
- B. 16GB RAM
- C. 32GB RAM
- D. 64GB RAM
Answer: C
NEW QUESTION # 32
Refer to the exhibit.
A FortiSlEM administrator wants to group some attributes for a report, but is not able to do so successfully.
As shown in the exhibit, why are some of the fields highlighted in red?
- A. Unique attributes cannot be grouped.
- B. No RAW Event Log attribute is available for devices.
- C. The Event Receive Time attribute is not available for logs.
- D. The attribute COUNT(Matched event) is an invalid expression.
Answer: A
NEW QUESTION # 33
A FortiSIEM supervisor at headquarters is struggling to keep up with an increase of EPS (Events Per Second) being reported across the enterprise. What components should an administrator consider deploying to assist the supervisor with processing data?
- A. Collector
- B. Agent
- C. Worker
- D. Supervisor
Answer: C
NEW QUESTION # 34
Refer to the exhibit.
What do the yellow stars listed in the Monitor column indicate?
- A. A yellow star indicates that a metric was not applied during discovery and, therefore, FortiSEIM was unable to collect data.
- B. A yellow star indicates that a metric was applied during discovery, and data has been collected successfully
- C. A yellow star indicates that a metric was applied during discovery, but FortiSIEM is unable to collect data.
- D. A yellow star indicates that a metric was applied during discovery, but data collection has not started
Answer: A
NEW QUESTION # 35
Refer to the exhibit.
If events are grouped by Event Receive Time, Reporting IP, and User attributes in FortiSIEM, how many results will be displayed?
- A. Four results will be displayed
- B. Two results will be displayed
- C. Eight results will be displayed
- D. Unique attributes cannot be grouped
Answer: D
NEW QUESTION # 36
Which database is used for storing anomaly data, that is calculated for different parameters, such as traffic and device resource usage running averages, and standard deviation values?
- A. Profile DB
- B. SVN DB
- C. Event DB
- D. CMDB
Answer: A
NEW QUESTION # 37
Which two FortiSIEM components work together to provide real-time event correlation?
- A. Supervisor and collector
- B. Collector and Windows agent
- C. Worker and collector
- D. Supervisor and worker
Answer: A
NEW QUESTION # 38
......
NSE5_FSM-5.2 Exam Crack Test Engine Dumps Training With 43 Questions: https://www.practicedump.com/NSE5_FSM-5.2_actualtests.html
Obtain the NSE5_FSM-5.2 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass: https://drive.google.com/open?id=1JxYHScgp91uNF8oUa-ZTCZINw0EmweQ8