[Dec 31, 2021] Genuine JN0-663 Exam Dumps New 2021 Juniper Pratice Exam
New 2021 Realistic JN0-663 Dumps Test Engine Exam Questions in here
How to book the Service Provider Routing and Switching, Professional JN0-663 Exam
These are the following steps for registering for the Juniper JN0-663 exam test. Step 1: Visit Pearson VUE Exam Registration Step 2: Signup/Login to Pearson VUE account Step 3: Search for Juniper JN0-663 Exam Step 4: Select Date, time and confirm with a payment method
NEW QUESTION 45
Exhibit:
Referring to the exhibit, you have recently established a Layer 3 VPN between PE-1 and PE-2, connecting the two CE sites. Rowing information is being shared between sites and the customer has two-way communication After adding this VPN to your core network, PE-1 and PE-2 are no longer able to forward traffic to the Internet.
In this scenario, what is the problem?
- A. You must configure a separate internal BGP group on both your PE devices specifically for Internet connectivity.
- B. You must configure the inet-vpn NLRI for the BGP sessions on both your PE devices.
- C. You must configure a multihop external BGP session between your PE devices and the Internet provider's ISP-A device.
- D. You must configure the inet unicast NLRI for the BGP session on both your PE devices.
Answer: D
NEW QUESTION 46
Exhibit:
Your network connects two segments of your customer's network as shown in the exhibit They need to exchange routes between Segment 1 and Segment 2 but both segments use the same AS number.
Which two steps will accomplish this task? (Choose two.)
- A. Configure the routing-options autonomous-system loops l parameter on routers R1 and R4.
- B. Configure the routing-options autonomous-system loops l parameter on routers R2 and R3.
- C. Configure the BGP group with the as-override parameter on routers R1 and R4.
- D. Configure the BGP group with the advertise-peer-as parameter on routers R2 and R3.
Answer: A,D
NEW QUESTION 47
Exhibit:
Referring to the exhibit, which two statements are true? (Choose two.)
- A. There are two interfaces marked as passive.
- B. There is one interface marked as passive.
- C. This router is an ABR
- D. This router is an ASBR.
Answer: A,D
NEW QUESTION 48
What are two reasons an IBGP learned route would be hidden? (Choose two.)
- A. The route is suppressed by damping.
- B. The route is rejected by an export policy.
- C. The route has a next hop of the local routing device.
- D. The route has an empty AS path.
Answer: A,C
NEW QUESTION 49
Exhibit.
You are troubleshooting a problem with a BGP peer where BGP routes are not being accepted from that peer Referring to the exhibit, which two statements are correct*? (Choose two )
- A. You cannot have terminating actions outside of terms.
- B. The reject at the end of the policy is preventing the routes from being accepted.
- C. Term 0 is missing a route-fitter that specifies the allowed routes
- D. Term 0 is missing a terminating action that allows BGP routes to be accepted
Answer: A,B
NEW QUESTION 50
Exhibit:
Referring to the exhibit, what will the IS-IS cost be for R1 to reach R3?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 51
Exhibit:
R1 assigns incoming voice traffic to the ef forwarding class. All other traffic is assigned to the best-effort forwarding class You have configured a CoS re-write rule on R1 to include the correct CoS bit values in packets sent towards R2 You want R2 to classify traffic using the CoS markings created by R1.
Which two configuration steps are necessary to accomplish this task? (Choose two.)
- A. Assign the CoS re-write rule to the ge-0/0/1.0 interface on R2.
- B. Assign the behavior aggregate classifier to the ge-0/0/1.0 interface on R2.
- C. Configure a behavior aggregate classifier on R2.
- D. Configure a CoS re-write rule on R2 and assign matching CoS values.
Answer: A,B
NEW QUESTION 52
Exhibit:
You must configure an OSPF virtual link to facilitate communication between Area 0 and Area 20.
Referring to the exhibit, which two addresses should you use as the neighbor IDs of the virtual link endpoints?
(Choose two.)
- A. The address that is associated with R2's xe-1/2/0 interface.
- B. The address that is associated with R2's router ID.
- C. The address that is associated with R4's xe-0/0/1 interface.
- D. The address that is associated with R4's router ID.
Answer: B,D
NEW QUESTION 53
Exhibit:
You have an established Layer 3 VPN between two PE devices. You are asked to only send certain routes from PE-1 over the VPN to the remote site while maintaining all the routes on the PE-1 device. You created a policy that matches the specific routes and then tags these routes with the appropriate target community values.
In this scenario, which configuration changes must be made to satisfy the requirement?
- A. Configure the vrf-export parameter and apply the policy under the edit routing-instances vpn-a hierarchy.
- B. Configure a RIB group and apply the policy as an import policy to routes distributed into the bgp I3vpn.0 routing table
- C. Configure the import parameter and apply the policy to the my-ext-group BGP group configuration.
- D. Configure the export parameter and apply the policy to the my-ext-group BGP group configuration.
Answer: A
NEW QUESTION 54 
You have the Layer 2 VPN configuration shown in the exhibit. You are asked to determine the remote site ID for ge-1/0/1.512.
In this scenario, what is the remote site ID?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 55
Exhibit:
R1 assigns incoming voice traffic to the ef forwarding class. All other traffic is assigned to the best-effort forwarding class You have configured a CoS re-write rule on R1 to include the correct CoS bit values in packets sent towards R2 You want R2 to classify traffic using the CoS markings created by R1.
Which two configuration steps are necessary to accomplish this task? (Choose two.)
- A. Assign the CoS re-write rule to the ge-0/0/1.0 interface on R2.
- B. Assign the behavior aggregate classifier to the ge-0/0/1.0 interface on R2.
- C. Configure a behavior aggregate classifier on R2.
- D. Configure a CoS re-write rule on R2 and assign matching CoS values.
Answer: A,B
NEW QUESTION 56
Exhibit:
A network administrator is migrating from IPv4 to IPv6 and one of the IS-IS adjacencies is not coming up between R1 and R2.
Which action will solve the problem?
- A. Remove topologies ipv6-unicast from protocols isis on R2.
- B. Remove topologies ipv6-unicast from protocols isis on R1.
- C. Configure topologies ipv4-unicast from protocols isis on R2.
- D. Configure an IPv4 address on interface ge-0/0/1 on R1.
Answer: D
NEW QUESTION 57
Exhibit:
Referring to the exhibit, you want to reduce the CPU processing load on PE 2 by preventing the receipt of routes belonging to Customer B.
In this scenario, which Layer 3 VPN scaling mechanism provides this functionality?
- A. route origin
- B. route target filtering
- C. route refresh
- D. route reflection
Answer: B
NEW QUESTION 58
Exhibit:
A Layer 3 VPN exists in the provider network and the CE devices are connecting to the PE devices using BGP. The PE devices are receiving BGP routes from the CE devices and the PE devices have the CE BGP routes in their respective routing tables. However, the remote CE devices are not receiving the BGP routes.
Referring to the exhibit, what is the problem?
- A. The CE devices are detecting an AS loop
- B. A VRF target community mismatch exists.
- C. The PE devices are detecting an AS loop.
- D. A route distinguisher mismatch exists.
Answer: A
NEW QUESTION 59
Exhibit:
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The CE-1 and CE-2 routes will have the same route distinguisher, which will not stop the BGP routes from being shared.
- B. An AS loop will not exist between CE-1 and CE-2 and the BGP routes will be shared.
- C. The CE-1 and CE-2 routes will have the same route distinguisher, which will stop the BGP routes from being shared.
- D. An AS loop will exist between CE-1 and CE-2 and the BGP routes will not be shared.
Answer: A,D
NEW QUESTION 60
Which two types of LSAs have an area scope? (Choose two)
- A. Type 11
- B. Type 7
- C. Type5
- D. Type 2
Answer: A,D
NEW QUESTION 61
......
For more info visit:
Juniper JN0-663 Exam Reference
Grab latest Amazon JN0-663 Dumps as PDF Updated: https://www.practicedump.com/JN0-663_actualtests.html
Updated Official licence for JN0-663 Certified by JN0-663 Dumps PDF: https://drive.google.com/open?id=1k7Z_rQ9_0beD8Q4f1CO-X1fyNbkBEXLN