Free ServiceNow CIS-Discovery Study Guides Exam Questions & Answer
CIS-Discovery Exam Dumps, CIS-Discovery Practice Test Questions
Average Salary for Certified Implementation Specialist â Discovery (CIS Discovery) Exam Certified Professional
The average salaries of CIS Discovery Exam certified professional in different countries is stated below:
- United States: 66,500 USD
- Europe: 55,000 Euro
- India: 4,00,000 INR
NEW QUESTION 10
Based on this image, which of the following statements are true? (Choose three.)
- A. If a value is unmatched, it is still merged into the Target Table.
- B. For this operation to run, there must be some data in the process.executablePath variable.
- C. Attributes from two tables populate a table with the same name as a ServiceNow CMDB table.
- D. This is a horizontal pattern of type "infrastructure."
- E. This operation is more than likely a part of a step on a pattern set to Application Pattern Type.
Answer: B,D,E
NEW QUESTION 11
What does AMB Stand for in ServiceNow?
Response:
- A. Asynchronous messaging bus
- B. Automatic Message bus
- C. Asynchronous midserver bus
Answer: A
NEW QUESTION 12
Given a custom column named u_custom_column on table cmdb_ci_linux_server, which variable syntax should be used to populate the column in a horizontal discovery pattern using the Set Parameter Value operation?
- A. $cmdb_ci_linux_server.u_custom_column.INSERT
- B. $cmdb_ci_linux_server[*].u_custom_column
- C. $user_var_custom_column
- D. $u_custom_column[1].cmdb_ci_linux_server
Answer: A
NEW QUESTION 13
The following is displayed while discovering a new network device on a Discovery Status: "Active, couldn't classify". What could cause this error?
Response:
- A. Incorrect SNMP credentials.
- B. No SNMP Classification exists for the new device.
- C. Lack of SNMP only behavior configuration.
- D. Communication between target device and the MID Server blocked by a firewall.
Answer: A
NEW QUESTION 14
What are the different ways of extending discovery.
Response:
- A. Classifiers
- B. None of these
- C. Discovery Patterns
- D. Probes and Sensors
Answer: A,C,D
NEW QUESTION 15
When troubleshooting discovery from a discovery status, which of the following lists will prove helpful?
(Choose 3 answers)
Response:
- A. ECC Queue
- B. Devices
- C. Discovery Log
- D. Running Processes
Answer: A,B,C
NEW QUESTION 16
In a pattern operation, to correctly call the value of the execDir variable from tabular process variable, we should use ________ .
Response:
- A. $process_execDir
- B. $process.execDir
- C. process(execDir)
- D. "process_execDir"
Answer: B
NEW QUESTION 17
What could be used for an infrastructure pattern in the Debug Identification Section in Debug Mode?
(Choose 2 answers.)
Response:
- A. AWS Endpoint
- B. Host Name
- C. PID
- D. IP
Answer: B,D
NEW QUESTION 18
Minimum Shazzam Batch Size for a Discovery Schedule.
Response:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 19
Which of the following pattern operations query targets? (Choose two.)
- A. Merge Table
- B. WMI Query
- C. Parse Variable
- D. Get Process
Answer: A,B
NEW QUESTION 20
The Quick Discovery process requires ______ and ______ .
(Choose 2 answers)
Response:
- A. MID Server
- B. PID
- C. Target IP
- D. Discovery Schedule
Answer: A,C
NEW QUESTION 21
The URL to the connected instance is stored in the ______ file on the MID Server host.
Response:
- A. wrapper.xml
- B. startup.bat
- C. settings.xml
- D. config.xml
Answer: D
NEW QUESTION 22
Where are the configurations for the widget metrics of the CMDB Health Dashboard captured in the system.
Response:
- A. Configuration-> Health Preferences
- B. Only a
- C. both Configuration-> Health Preferences & Configuration-> CI Class Manager
Answer: C
NEW QUESTION 23
What is necessary to use Debug form Pattern Designer?
Response:
- A. Installed Service Mapping
- B. Admin role
- C. Proxy server
- D. Discoverable Cl
Answer: D
NEW QUESTION 24
Which of the following choices must be installed on a MID Server to run Credential-less Discovery?
- A. Nmap
- B. Advanced IP Scanner
- C. Defender
- D. Credential-less Extension
Answer: A
NEW QUESTION 25
For the Parse Variable pattern operation, what is required to have two different parsing methods to populate variables?
- A. A tabular and a scalar variable.
- B. Two different steps.
- C. Two different Debug Mode sessions.
- D. Two different Define Parsing selections on the same step.
Answer: D
NEW QUESTION 26
Can we configure multiple ports per port probe?
Response:
- A. No, only one port per port probe can be configured
- B. Yes
Answer: B
NEW QUESTION 27
Disk CI is discovered during the Linux Server discovery. The next time the Linux Server is discovered, the same related Disk CI is not found. What will happen if the deletion strategy for related Disk CI is set to
"Mark as absent"?
Response:
- A. Disk CI Operational Status (operational_status) will be set to Non-Operational.
- B. Linux Server CI Operational Status (operational_status) will be set to Non-Operational.
- C. Linux Server CI Status (install_status) will be set to Absent.
- D. Disk Status CI (install_status) will be set to Absent.
Answer: D
NEW QUESTION 28
Select the correct statements for ECC Queue during discovery.
Response:
- A. An Input record in ECC Queue is a sensor
- B. An Input record in ECC Queue is a shazzam probe
- C. An output record in ECC Queue is a sensor
- D. An output record in ECC Queue is a shazzam probe
Answer: A,D
NEW QUESTION 29
Connect Discover option from a Discovery Schedule with its description.
Option:
1.Service
2.Serverless
3.P addresses
4. Networks
5. Configuration items
Description:
A: Create or update CIs from devices
B: Discover services for Service Mapping
C: Scan devices without credentials
D: Discover IP Networks
E: Find CIs without running host discovery
Response:
- A. 1-E, 2-B, 3-A, 4-C, 5-D
- B. 1-A, 2-C, 3-B, 4-D, 5-E
- C. 1-B, 2-E, 3-C, 4-D, 5-A
- D. 1-A, 2-B, 3-C, 4-D, 5-E
Answer: C
NEW QUESTION 30
What is the correct order of the Discovery phases?
Response:
- A. Port Scan Phase, Classification Phase, Identification Phase, Exploration Phase
- B. Port Scan Phase, Classification Phase, Exploration Phase, Identification Phase
- C. Classification Phase, Exploration Phase, Identification Phase,Port Scan Phase
- D. Identification Phase, Port Scan Phase, Classification Phase, Exploration Phase
Answer: A
NEW QUESTION 31
Discovery scanned 10,000 IP addresses using a single MID Server. If discovery created 10 Shazzam probes and each probe scanned 1000 IP addresses, then ________ is set to 1000.
Response:
- A. MID Server Clusters value
- B. MID Server selection method
- C. Shazzam Batch Size
- D. Behaviors value
Answer: C
NEW QUESTION 32
What value in the Queue Column do you check to differentiate between probes and sensor records in the ECC Queue?
Response:
- A. Sensor records are in the output queue, probe record are in Input Queue
- B. Sensor records are in the input queue, probe record are in Output Queue
Answer: B
NEW QUESTION 33
......
Latest CIS-Discovery Actual Free Exam Questions Updated 186 Questions: https://www.practicedump.com/CIS-Discovery_actualtests.html
Attested CIS-Discovery Dumps PDF Resource [2021]: https://drive.google.com/open?id=1vBzbLbLQQ-9W4KU7SyzVfjq4ZKao_PMD