Get ready to pass the NS0-173 Exam right now using our Cisco and NetApp FlexPod Exam Package
A fully updated 2021 NS0-173 Exam Dumps exam guide from training expert PracticeDump
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 22
Your customer has a FlexPod implementation and wants to use life-cycle management to validate, monitor, and optimize the FlexPod infrastructure.
In this situation, which management tool should your customer use?
- A. Cisco UCS Director
- B. NetApp OnCommand Unified Manager
- C. NetApp Converged System Advisor
- D. Cisco UCS Manager
Answer: A
Explanation:
Cisco UCS Director can be an integral companion for FlexPod because it allows holistic management through centralized automation and orchestration from a single, unified view. When FlexPod and Cisco UCS Director are combined, IT can shift time and focus from managing infrastructure to delivering new service innovation. Used together, FlexPod and Cisco UCS Director deliver:
NEW QUESTION 23
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. EIGRP
- B. STP
- C. vPC
- D. VXLAN
Answer: D
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 24
Your customer wants assurances that all aspects of FlexPod are highly available.
Which statement is correct in this scenario?
- A. Cisco UCS Manager maintains a replica of configuration information.
- B. Cisco UCS Manager automatically copies its configuration data to a remote data store.
- C. Cisco UCS Manager uses active-active architecture.
- D. Cisco UCS Manager contains multiple UCS domains.
Answer: A
Explanation:
The management and data plane of Cisco UCS is designed for high availability and redundant access layer fabric interconnects. In addition, Cisco UCS supports existing high availability and disaster recovery solutions for the data center, such as data replication and application-level clustering technologies.
NEW QUESTION 25
A customer is planning to use a pair of MDS switches in a FlexPod design to host a few SAN workloads.
In this scenario, which two features should be enabled on the MDS switches for a successful configuration? (Choose two.)
- A. fport-channel-trunk
- B. NPV
- C. port-channel-trunk
- D. NPIV
Answer: C,D
NEW QUESTION 26
Click the Exhibit button.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)
- A. I.
- B. IV
- C. II.
- D. III.
Answer: B,D
NEW QUESTION 27
A customer recently configured its Cisco UCS, and within the Chassis Discovery policy, they set the link group preference to Port Channel.
Which two benefits would they derive from this link group preference? (Choose two.)
- A. All the links between the Cisco Fabric Interconnects and chassis IOM are shared.
- B. Traffic is load balanced across the links.
- C. Each blade has an assigned Cisco Fabric Interconnects link.
- D. All the links between the Cisco Fabric Interconnects and chassis IOM are pinned.
Answer: A,B
NEW QUESTION 28
A FlexPod administrator is building a WWN pool for a server that has 33 ports.
In this scenario, what is the smallest size possible for the pool?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 29
A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)
- A. FC portsets
- B. ALUA settings
- C. MTU configuration
- D. FC zoning
- E. igroup configuration
Answer: A,C,E
NEW QUESTION 30
You are asked to design a FlexPod solution that meets the minimum requirements and includes Application Centric Infrastructure (ACI).
Which three Cisco components are required in this scenario? (Choose three.)
- A. Cisco UCS B-Series servers
- B. Cisco Nexus 2000 Series Fabric Extender
- C. Cisco Nexus 3000 Series switches
- D. Cisco UCS Series Fabric Interconnects
- E. Cisco Nexus 9000 Series switches
Answer: A,D,E
NEW QUESTION 31
A customer is evaluating management tools for a new FlexPod infrastructure. They desire a tool that can orchestrate the provisioning of UCS compute nodes, NetApp storage, and VMware networking.
Which tool satisfies the requirements of this customer's heterogeneous environment?
- A. NetApp OnCommand Insight
- B. UCS Central
- C. UCS Director
- D. NetApp OnCommand Unified Manager
Answer: C
NEW QUESTION 32
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. one
- B. four
- C. two
- D. three
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 33
You are configuring high availability within the network layer of your FlexPod configuration.
In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches?
(Choose two.)
- A. Port channels should be configured for LACP passive mode.
- B. The vPC auto-recovery feature should be enabled.
- C. A minimum of four 10GB Ethernet connections are required for vPC.
- D. Peer keep-alive connectivity between the switches should be established.
Answer: C,D
Explanation:
vPC also relies on the periodic keepalive messages to determine when one of the connected devices on the peer link fails.
vPC peer link - The link used to synchronize states between the vPC peer devices. Both ends must be on 10- Gigabit Ethernet or 40-Gigabit Ethernet interfaces.
Reference:
configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/ b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
NEW QUESTION 34
A customer is investigating options for implementing a FlexPod Datacenter solution that is using vSphere 6.x.
In this scenario, which two resources would be important to review? (Choose two.)
- A. NetApp Technical Report
- B. Cisco Validated Design documents
- C. Cisco Cloud Center documentation
- D. VMware vSAN documentation
Answer: A,B
NEW QUESTION 35
A customer has verified physical connectivity on the FlexPod. However, the LUNs are not available on the Cisco UCS server. To make the LUNs visible to the UCS, the customer must enable a switching feature for zoning.
In this scenario, what should the customer do?
- A. Enable the device connector feature in Cisco UCS Manager.
- B. Enable Spine mode on all the Cisco Nexus 9000 switches.
- C. Enable NPV on all switches.
- D. Enable NPIV on all switches.
Answer: A
NEW QUESTION 36
When FCoE is configured in a FlexPod environment, which step is required?
- A. Assign a VLAN to the FC Uplink port on the Cisco Fabric Interconnects.
- B. Create a VSAN within service profiles.
- C. Assign a VSAN to the server uplink port on the Cisco Fabric Interconnects.
- D. Create a VSAN to support FCoE for the FC uplink.
Answer: C
NEW QUESTION 37
......
Master 2021 Latest The Questions Cisco and NetApp FlexPod and Pass NS0-173 Real Exam!: https://www.practicedump.com/NS0-173_actualtests.html