[Jul 24, 2023] 156-581 PDF Dumps is essential on your 156-581 Exam Questions Certain Success! [Q40-Q56]

Share

[Jul 24, 2023] 156-581 PDF Dumps is essential on your 156-581 Exam Questions Certain Success!

156-581 PDF Questions - Perfect Prospect To Go With 156-581 Practice Exam

NEW QUESTION # 40
After reviewing the Install Policy report and error codes listed in it, you need to check if the policy installation port is open on the Security Gateway. What is the correct port to check?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B


NEW QUESTION # 41
What is a primary advantage of using the fw monitor tool?

  • A. It can capture packets in various positions as they move through the firewall
  • B. It has no negative impact on firewall performance
  • C. It is menu-driven, making it easy to configure
  • D. It always captures all packets hitting the physical layer

Answer: A


NEW QUESTION # 42
Select the technology that does the following actions
- provides reassembly via streaming for TCP
- handles packet reordering and congestion
- handles payload overlap
- provides consistent stream of data to protocol parsers

  • A. Pre-Protocol Parser
  • B. A Passive Streaming Library
  • C. Context Management
  • D. fwtcpstream

Answer: B


NEW QUESTION # 43
Johnny works as a firewall administrator in ALPHA Corporation. He is also an Account Administrator in the Check Point UserCenter for his company. When searching through SecureKnowledge he found an article which can help him but he couldn't access the article, because has no permission to access it. What could cause this problem?

  • A. ALPHA Corporation's Support contract expired, or he is not Check Point certified professional
  • B. Only Check Point Support Engineers have access to articles with higher Technical Level
  • C. ALPHA Corporation's Support contract expired
  • D. Johnny must be Check Point Certified Security Master to get access articles with higher Technical Level

Answer: A


NEW QUESTION # 44
Johnny has connectivity issues on datacenter firewall. His access to Finance department server suddenly stopped working. He is constantly redirected to Captive Portal and asked to login. After some research he gets information that the Windows administrator had to reinstall one of the DCs because of hardware failure. How can Johnny check what is causing connectivity problems between gateway and this DC?

  • A. He should run CLI command 'adlog a query on datacenter firewall to verify connections to all DCs
  • B. He should run CLI command 'adlog a statistic on perimeter firewall to verify connections to all DCs
  • C. He should run CLI command 'adlog a dc' on datacenter firewall to verify connections to all DCs
  • D. He should run CLI command 'adlog a dc' on perimeter firewall to verify connections to all DCs

Answer: C


NEW QUESTION # 45
You have just acquired new licenses for your Check Point security Gateway. You need to attach the new license.
What is the object in the Security Console where you can attach the license for a software blade?

  • A. Hardware Blade
  • B. Software Blade
  • C. Software Container
  • D. Security Blade

Answer: C


NEW QUESTION # 46
The customer is using Check Point appliances that were configured long ago by third-party administrators. Current policy includes different enabled IPS protections and Bypass Under Load function. Bypass Under Load is configured to disable IPS inspections if CPU and Memory usage is higher than 80%. The Customer reports that IPS protections are not working at all regardless of CPU and Memory usage. What is a possible reason of such behavior?

  • A. The kernel parameter ids_assume_stress is set to 1
  • B. The kernel parameter ids_tolerance_stress is set to 10
  • C. The kernel parameter ids_assume_stress is set to O
  • D. The kernel parameter ids_tolerance_no_stress is set to 10

Answer: B


NEW QUESTION # 47
Which of the following kernel tables can provide useful information in troubleshooting Hide NAT port exhaustion?

  • A. nat_entries
  • B. fw_nat
  • C. connections
  • D. fwx_alloc

Answer: D


NEW QUESTION # 48
The Identity Awareness process that enforces network access restrictions on traffic based on the identity and negotiates with PDP about shared identities is called?

  • A. Pep
  • B. pdp
  • C. Iaenforce
  • D. Iacontrol

Answer: A


NEW QUESTION # 49
What process(es) should be checked if there is high I/O and you suspect it may be related to the Antivirus Software Blade?

  • A. cpta
  • B. dlpu and rad processes
  • C. avsp
  • D. cpm and fwm

Answer: B


NEW QUESTION # 50
Which type of NAT allows both incoming and outgoing connections?

  • A. Port NAT
  • B. Both Static and Hide NAT
  • C. Static NAT
  • D. Hide NAT

Answer: C


NEW QUESTION # 51
Which command do you need to execute to insert fw monitor after TCP streaming (out) in the outbound chain using absolute position? Given the chain was 1ffffe0, select the correct answer.

  • A. fw monitor -pO -ox1ffffe0
  • B. fw monitor -po 1ffffe0
  • C. fw monitor -po -0x1ffffe0
  • D. fw monitor -pO ox1ffffe0

Answer: C


NEW QUESTION # 52
As a security administrator/engineer in your company, you have noticed that your HQ Check Point Security Management Server is not receiving logs from your HQ Check Point Gateway/Cluster.
To investigate this issue in the command line, you will need to verify which process is running?

  • A. fwm
  • B. cpm
  • C. cpd
  • D. fwd

Answer: D


NEW QUESTION # 53
When managing the disk space for locally stored logs, the Delete threshold for the gateway cannot be more than what percentage of the total disk space?

  • A. 25%
  • B. 75%
  • C. 50%
  • D. 10%

Answer: A


NEW QUESTION # 54
After deploying a Hide NAT for a new network, users are unable to access the Internet.
What command would you use to check the internal NAT behavior?

  • A. fw ctl kdebug + xlate xltrc nat
  • B. fw ctl zdebug + xlate xltrc nat
  • C. cp ctl kdebug + xlate xltrc nat
  • D. cp ctl zdebug + xlate xltrc nat

Answer: B


NEW QUESTION # 55
Which of these would be the best way to alter the chain insertion point of fw monitor"?

  • A. Changing its settings in dbedit or Guldbedit
  • B. Setting the "monitor" parameter with "fw ctl chain"
  • C. Using the "-p" parameter in the command line
  • D. Altering the "monitor" value in kernel parameters

Answer: C


NEW QUESTION # 56
......

156-581 Exam with Accurate Check Point Certified Troubleshooting Administrator - R81 PDF Questions: https://www.practicedump.com/156-581_actualtests.html

True CheckPoint Exam Extraordinary Practice For the 156-581 Exam: https://drive.google.com/open?id=1rW51w0HYVGPz-g890u--1qbyzYVfQVxX