Best Quality CheckPoint 156-315.80 Exam Questions PracticeDump Realistic Practice Exams [2021]
Critical Information To Check Point Certified Security Expert - R80 Pass the First Time
Check Point Certified Security Expert - R80 156-315.80 Exam
Check Point Certified Security Expert - R80 156-315.80 Exam is related to Check Point Certified Security Expert Certification.156-215.80 Exam test candidates skills to build, modify, deploy and troubleshoot Check Point Security Systems on the GAIA Operating System, This exam also verify the candidate have the knowledge to debug Firewall Processes, Optimize VPN Performance and Upgrade Management Servers. System Security Consultant and Server Managers usually hold or pursue this certification and candidate can expect the same job roles after completion of this certification.
What is the duration of the 156-315.80 Exam
- Format: Multiple choices, multiple answers
- Passing Score: 70%
- Length of Examination: 90 minutes
- Number of Questions: 100
NEW QUESTION 58
Using mgmt_cli, what is the correct syntax to import a host object called Server_1 from the CLI?
- A. mgmt._cli add object "Server-1" ip-address "10.15.123.10" --format json
- B. mgmt_cli add-host "Server_1" ip_address "10.15.123.10" --format txt
- C. mgmt_cli add object-host "Server_1" ip-address "10.15.123.10" --format json
- D. mgmt_cli add host name "Server_1" ip-address "10.15.123.10" --format json
Answer: D
Explanation:
Explanation
Example:
mgmt_cli add host name "New Host 1" ip-address "192.0.2.1" --format json
* "--format json" is optional. By default the output is presented in plain text.
NEW QUESTION 59
Fill in the blank: The R80 feature _____ permits blocking specific IP addresses for a specified time period.
- A. Adaptive Threat Prevention
Suspicious Activity Rules Solution
Suspicious Activity Rules is a utility integrated into SmartView Monitor that is used to modify access privileges upon detection of any suspicious network activity (for example, several attempts to gain unauthorized access).
The detection of suspicious activity is based on the creation of Suspicious Activity rules. Suspicious Activity rules are Firewall rules that enable the system administrator to instantly block suspicious connections that are not restricted by the currently enforced security policy. These rules, once set (usually with an expiration date), can be applied immediately without the need to perform an Install Policy operation. - B. Suspicious Activity Monitoring
- C. Local Interface Spoofing
- D. Block Port Overflow
Answer: B
NEW QUESTION 60
What is the limitation of employing Sticky Decision Function?
- A. With SDF enabled, you can only have three Sync interfaces at most
- B. With SDF enabled, the involved VPN Gateways only supports IKEv1
- C. With SDF enabled, only ClusterXL in legacy mode is supported
- D. Acceleration technologies, such as SecureXL and CoreXL are disabled when activating SDF
Answer: D
Explanation:
References:
NEW QUESTION 61
SandBlast offers busineses flexibility in implementation based on their individual business needs. What is an option for deployment of Check Point SandBlast Zero-Day Protection?
- A. Public Cloud Service
- B. Smart Cloud Service
- C. Threat Agent Service
- D. Any Cloud Service
Answer: B
NEW QUESTION 62
What two ordered layers make up the Access Control Policy Layer?
- A. Network and Application Control
- B. URL Filtering and Network
- C. Network and Threat Prevention
- D. Application Control and URL Filtering
Answer: A
Explanation:
Explanation
NEW QUESTION 63
When simulating a problem on ClusterXL cluster with cphaprob -d STOP -s problem -t 0 register, to initiate a failover on an active cluster member, what command allows you remove the problematic state?
- A. cphaprob unregister STOP
- B. cphaprob STOP unregister
- C. cphaprob -d unregister STOP
esting a failover in a controlled manner using following command;
# cphaprob -d STOP -s problem -t 0 register
This will register a problem state on the cluster member this was entered on; If you then run;
# cphaprob list
this will show an entry named STOP.
to remove this problematic register run following;
# cphaprob -d STOP unregister - D. cphaprob -d STOP unregister
Answer: D
NEW QUESTION 64
To accelerate the rate of connection establishment, SecureXL groups all connection that match a particular
service and whose sole differentiating element is the source port. The type of grouping enables even the very
first packets of a TCP handshake to be accelerated. The first packets of the first connection on the same
service will be forwarded to the Firewall kernel which will then create a template of the connection. Which of
the these is NOT a SecureXL template?
- A. Accept Template
- B. Deny Template
- C. NAT Template
- D. Drop Template
Answer: B
NEW QUESTION 65
When simulating a problem on ClusterXL cluster with cphaprob -d STOP -s problem -t 0 register, to initiate a failover on an active cluster member, what command allows you remove the problematic state?
- A. cphaprob unregister STOP
- B. cphaprob STOP unregister
- C. cphaprob -d unregister STOP
- D. cphaprob -d STOP unregister
Answer: D
Explanation:
esting a failover in a controlled manner using following command;
# cphaprob -d STOP -s problem -t 0 register
This will register a problem state on the cluster member this was entered on; If you then run;
# cphaprob list
this will show an entry named STOP.
to remove this problematic register run following;
# cphaprob -d STOP unregister
References:
NEW QUESTION 66
What is the purpose of Priority Delta in VRRP?
- A. When an Interface fail, Effective Priority = Priority - Priority Delta
- B. When a box up, Effective Priority = Priority + Priority Delta
- C. When a box fail, Effective Priority = Priority - Priority Delta
- D. When an Interface is up, Effective Priority = Priority + Priority Delta
Answer: A
Explanation:
Explanation
Each instance of VRRP running on a supported interface may monitor the link state of other interfaces. The
monitored interfaces do not have to be running VRRP.
If a monitored interface loses its link state, then VRRP will decrement its priority over a VRID by the
specified delta value and then will send out a new VRRP HELLO packet. If the new effective priority is less
than the priority a backup platform has, then the backup platform will beging to send out its own HELLO
packet.
Once the master sees this packet with a priority greater than its own, then it releases the VIP.
NEW QUESTION 67
What SmartEvent component creates events?
- A. SmartEvent GUI
- B. Consolidation Policy
- C. SmartEvent Policy
- D. Correlation Unit
Answer: D
Explanation:
References:
NEW QUESTION 68
To ensure that VMAC mode is enabled, which CLI command should you run on all cluster members?
- A. fw ctl set int fwha vmac global param enabled
- B. fw ctl get int vmac global param enabled; result of command should return value 1
- C. cphaprob-a if
- D. fw ctl get int fwha_vmac_global_param_enabled; result of command should return value 1
Answer: D
Explanation:
Explanation/Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_ClusterXL_AdminGuide/7292.htm
NEW QUESTION 69
What is the mechanism behind Threat Extraction?
- A. This is a new mechanism which is able to collect malicious files out of any kind of file types to destroy it prior to sending it to the intended recipient
- B. Any active contents of a document, such as JavaScripts, macros and links will be removed from the document and forwarded to the intended recipient, which makes this solution very fast
- C. This is a new mechanism to identify the IP address of the sender of malicious codes and to put it into the SAM database (Suspicious Activity Monitoring).
- D. This is a new mechanism which extracts malicious files from a document to use it as a counter-attack against its sender
Answer: B
NEW QUESTION 70
What are the two high availability modes?
- A. Traditional and New
- B. Active and Standby
- C. Load Sharing and Legacy
- D. New and Legacy
Answer: D
Explanation:
ClusterXL has four working modes. This section briefly describes each mode and its relative advantages and disadvantages.
NEW QUESTION 71
What is the order of NAT priorities?
- A. IP pool NAT, static NAT, hide NAT
- B. Static NAT, IP pool NAT, hide NAT
- C. Static NAT, hide NAT, IP pool NAT
- D. Static NAT, automatic NAT, hide NAT
Answer: B
NEW QUESTION 72
What is a feature that enables VPN connections to successfully maintain a private and secure VPN session without employing Stateful Inspection?
- A. VPN Routing Mode
- B. Stateless Mode
- C. Wire Mode
- D. Stateful Mode
Answer: C
Explanation:
Wire Mode is a VPN-1 NGX feature that enables VPN connections to successfully fail over, bypassing Security Gateway enforcement. This improves performance and reduces downtime. Based on a trusted source and destination, Wire Mode uses internal interfaces and VPN Communities to maintain a private and secure VPN session, without employing Stateful Inspection. Since Stateful Inspection no longer takes place, dynamic-routing protocols that do not survive state verification in non-Wire Mode configurations can now be deployed. The VPN connection is no different from any other connections along a dedicated wire, thus the meaning of "Wire Mode".
References:
NEW QUESTION 73
Which CLI command will reset the IPS pattern matcher statistics?
- A. ips pmstats reset
- B. ips pmstats refresh
- C. ips pstats reset
- D. ips reset pmstat
Answer: A
Explanation:
Explanation/Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_CLI_WebAdmin/84627.htm
NEW QUESTION 74
By default how often updates are checked when the CPUSE Software Updates Policy is set to Automatic?
- A. Seven times per day
- B. Every three hours
- C. Six times per day
- D. Every two hours
Answer: B
NEW QUESTION 75
Which of the following technologies extracts detailed information from packets and stores that information in state tables?
- A. Packet Filtering
- B. INSPECT Engine
- C. Application Layer Firewall
- D. Stateful Inspection
Answer: B
Explanation:
Explanation/Reference: https://www.checkpoint.com/training/ccsa/chapter1/
NEW QUESTION 76
What is the valid range for VRID value in VRRP configuration?
- A. 0 - 255
- B. 0 - 254
- C. 1 - 255
- D. 1 - 254
Answer: C
Explanation:
Virtual Router ID - Enter a unique ID number for this virtual router. The range of valid values is 1 to 255.
References:
NEW QUESTION 77
......
156-315.80 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.practicedump.com/156-315.80_actualtests.html
Best Quality CheckPoint 156-315.80 Exam Questions: https://drive.google.com/open?id=1dqgs_awfP3tSu0YBlKU6fdvksznDXjmX