Use Real 350-501 - 100% Cover Real Exam Questions [Oct-2021]
Dumps Brief Outline Of The 350-501 Exam - PracticeDump
NEW QUESTION 95 
Refer to the exhibit. A network engineer is implementing OSPF multiarea. Which command on interface G0/1 resolves adjacency issues in the new area?
- A. ip ospf network point-to-point
- B. ip ospf network non-broadcast
- C. ip ospf network point-to-multipoint
- D. ip ospf network broadcast
Answer: A
Explanation:
Section: Networking
Explanation/Reference:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/118879-configure-ospf-
00.html#:~:text=When%20Multi%2DArea%20Adjacency%20is,which%20the%20ADJ%20is%20formed.
NEW QUESTION 96
Refer to the exhibit:
R1 and R2 are directly connected with Fast Ethernet interfaces and have the above configuration applied OSPF adjacency is not formed. When the debug ip ospf hello command is issued on R1. these log messages are seen.
Which command can be configured on routers R1 and R2 on fO/O interfaces to form OSPF adjacency?
- A. ip ospf network point-to-point
- B. ip ospf network point-to- multipoint non-broadcast
- C. ip ospf network non-broadcast
- D. ip ospf network broadcast
Answer: A
NEW QUESTION 97
A router is configured to perform MPLS LDP graceful restart.
Which three steps are included when the RP sends an LDP initialization to a neighbor to establish an LDP session? (Choose three)
- A. Graceful restart capability in OPEN message
- B. Learn from Neighbor (N) flag, set to 1
- C. Recovery Time field
- D. Reconnect Timeout field
- E. Type-9 LSA
- F. Learn from Network (L.) flage, set to 1
Answer: C,D,F
NEW QUESTION 98
Drag and drop the functionalities from the left onto the correct target fields on the right.
Answer:
Explanation:
NEW QUESTION 99
Refer to the exhibit:
Which effect of this configuration is true?
- A. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage
- B. R1 can failover only to a peer that is configured for LDP SSO/NSF
- C. R1 can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer
- D. R1 can failover to any peer
Answer: A
NEW QUESTION 100
Refer to the exhibit.
An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.
Answer:
Explanation:
Explanation
Best - 50.50.50.2
2nd Best - 40.40.40.2
3rd Best - 20.20.20.2
44th Best - 30.30.30.2
NEW QUESTION 101
Which statement about segment routing prefix segments is true?
- A. It requires using EIGRP to operate
- B. It is linked to an adjacency SID that is globally unique within the router
- C. It is the longest path to a node
- D. It is linked to a prefix SID that is globally unique within segment routing domain
Answer: D
NEW QUESTION 102
Refer to the exhibit.
An engineer needs to implement this QoS policy on a customer's network due to ongoing slow network issues.
What will be the effect on the network when the engineer implements this configuration?
- A. Traffic that is identified in the cisotest class map will be marked from IP prcedence 1to DSCP when it enters the pos0/2/0/0 interface.
- B. Traffic that is identified in the cisopolicy class map will me marked with IP prcedence 1to DSCPAF11 when it exits the pos0/2/0/0
- C. Traffic that is identified in the cisotest class map will be marked with IP prcedence 1 when it exist the pos0/2/0/0 interface.
- D. Traffic that is identified in the cisopolicy class map will me marked with IP prcedence 1 when it enters the pos0/2/0/0
Answer: B
NEW QUESTION 103 
Refer to the exhibit. If the NetFlow configuration is updated to version 9, which additional piece of information can be reported?
- A. flow sequence numbers
- B. BGP AS information
- C. IPv6 flow information
- D. IPv4 flow information
Answer: C
Explanation:
Section: Automation and Assurance
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/12-2sx/ipv6-12-2sx-book/ip6- netflow.html
NEW QUESTION 104
You are configuring MPLS traffic-engineering tunnels in the core.
Which two ways exist for the tunnel path across the core? (Choose two )
- A. Tunnels can be configured with dynamic path or explicitly defined path
- B. T he bandwidth statement creates a "hard" reservation on the link-The dynamic path option is supported only with IS-IS
- C. Tunnel links inherit IGP metrics by default unless overridden
- D. A zero bandwidth tunnel is not a valid option
Answer: A,C
NEW QUESTION 105
Which two IS-IS parameters must match before two level 2 peers will form an adjacency? (Choose two.)
- A. area ID
- B. authentication settings
- C. MTU
- D. system ID
- E. hello timer setting
Answer: B,C
NEW QUESTION 106
Why do Cisco MPLS TE tunnels require a link-state routing protocol?
- A. The link-state database provides segmentation by area, which improves the path-selection process.
- B. The link-state database provides a data repository from which the tunnel endpoints can dynamically select a source ID.
- C. Link-state routing protocols use SPF calculations that the tunnel endpoints leverage to implement the tunnel.
- D. The tunnel endpoints use the link-state database to evaluate the entire topology and determine the best path.
Answer: D
Explanation:
Section: Architecture
NEW QUESTION 107
A network engineer is configuring Flexible NetFlow and enters these commands
What are two results of implementing this feature instead of traditional NetFlow? (Choose two.)
- A. CPU and memory utilization are reduced.
- B. The accuracy of the data to be analyzed is improved.
- C. The number of packets to be analyzed are reduced.
- D. The data export flow is more secure
- E. Only the flows of top 100 talkers are exported.
Answer: A,C
NEW QUESTION 108
Refer to the exhibit:
A network engineer is implementing QoS services. Which two statements about the QoS-group keyword on Cisco IOS XR 3re true? (Choose two )
- A. The QoS group numbering corresponds to priority level
- B. QoS group can be used in fabric QoS policy as a match criteria
- C. QoS group marking occurs on the ingress
- D. It cannot be used with priority traffic class
- E. It marks packets for end to end QoS pokey enforcement across the network
Answer: A,D
NEW QUESTION 109
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION 110
Refer to the exhibit.
An engineer is configuring path selection on router R1 for two ASNs as shown. Which additional task must the engineer perform on Router 1 so that all outbound traffic utilizes the link between R1 and R3 to reach ASN 4567?
- A. Configure an AS path prepend on the peer to ASN 4567.
- B. Configure a high med on the peer to ASN 4567.
- C. Configure a high weight on the peer to ASN 4567.
- D. Configure a low weigh! on the peer to ASN 4567.
Answer: C
NEW QUESTION 111
Drag and drop the methods of Cisco MPLS TE tunnel traffic assignment from the left onto their characteristics on the right.
Answer:
Explanation:
NEW QUESTION 112
Refer to the exhibit:
What is the URL used for with REST API?
- A. It is used to send a TACACS+ authentication request to a server
- B. It is used to send a message to the APIC to perform an operation on a managed object or class operator
- C. It is used to initiate an FTP session to save a running configuration of a device.
- D. It is used to contact a URL filter to determine the efficacy of a web address
Answer: B
NEW QUESTION 113
What is the characteristic of the Tl-LFA?
- A. It guarantees a loop-free path for all interfaces in the OSPf- super backbone .
- B. It guarantees a loop-free path for all areas configured m OSPF
- C. It applies on each area and instance and makes all the interfaces inherit the configuration
- D. It applies only on the instance and makes at the interfaces inherit the configuration
Answer: A
NEW QUESTION 114
Refer to the exhibit.
An engineer configured multicast routing on client's network. What is the effect of this multicast implementation?
- A. R1 floods information about R2 throughout the multicast domain.
- B. R2 is unable to share information because the ip pirn autorp listener command is missing.
- C. R2 floods information about R1 throughout the multicast domain.
- D. R2 is elected as the RP for this domain.
Answer: B
NEW QUESTION 115
Refer to the exhibit:
A network engineer is implementing a BGP protocol. Which effect of the locat-as keyword in this configuration is true?
- A. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family
- B. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family
- C. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.
- D. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration
Answer: C
NEW QUESTION 116
Refer to the exhibit:
A network operator working for service provider with an employee id 3715 15:021 applied this configuration to a router.
Which additional step should the engineer use to enable LDP?
- A. Delete the static router ID
- B. Enable MPLS LDP on the interface
- C. Disable Cisco Express Forwarding globally
- D. Configure the both keyword to enable LDP globally
Answer: B
NEW QUESTION 117
Which statement about Network Services Orchestrator (NSO) is true?
- A. It can be used only with XML coding
- B. It must use SDN as an overlay for addressing
- C. It uses YANG modeling language to automate devices
- D. It is used only in service provider environments
Answer: C
NEW QUESTION 118
......
Certification Training for 350-501 Exam Dumps Test Engine: https://www.practicedump.com/350-501_actualtests.html
350-501 Training & Certification Get Latest CCNP Service Provider : https://drive.google.com/open?id=1JrpxcqOcT9c7NBWPX1-df23OqXZIum1S