Latest [Oct 24, 2024] 100% Passing Guarantee - Brilliant 300-730 Exam Questions PDF
300-730 Certification – Valid Exam Dumps Questions Study Guide! (Updated 208 Questions)
Why Cisco 300-730 exams are so difficult and why they're worth taking?
Cisco certifications are the most trending certification exams on the market. The Cisco certifications have been developed by industry experts and cover a wide range of job roles. Tens of thousands of professionals have already benefited from these exams and are enjoying successful careers in the IT industry. If you are planning to take Cisco exams then you should read this article till the end, because it will help you get a better understanding of what these exams are all about and how they can benefit your career as well. Cisco 300-730 exam dumps are regarded as some of the most difficult certification exams on the market. The official question is to concepts the team pool. Instant correct answers are the update VCE and PDF software. Even though Cisco 300-730 is a relatively recent exam, there is no doubt that this exam is going to be popular among IT specialists who want to prove themselves as true professionals in the industry. The reason why Cisco 300-730 is so difficult is that it covers a lot of material. In order to pass this exam, you need to be skilled in many areas and that is not easy at all. You need to be able to configure and troubleshoot systems that involve many technologies, including voice, data, video, wireless, security, and many others.
Cisco 300-730 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Secure Communications Architectures | 30% | - Describe functional components of GETVPN, FlexVPN, DMVPN, and IPsec for site-to-site VPN solutions - Describe functional components of FlexVPN, IPsec, and Clientless SSL for remote access VPN solutions - Recognize VPN technology based on configuration output for site-to-site VPN solutions - Recognize VPN technology based on configuration output for remote access VPN solutions - Describe split tunneling requirements for remote access VPN solutions - Design site-to-site VPN solutions
- Design remote access VPN solutions
- Describe Elliptic Curve Cryptography (ECC) algorithms |
| Troubleshooting using ASDM and CLI | 35% | - Troubleshoot IPsec - Troubleshoot DMVPN - Troubleshoot FlexVPN - Troubleshoot AnyConnect IKEv2 on ASA and routers - Troubleshoot SSL VPN and Clientless SSLVPN on ASA |
| Remote access VPNs | 20% | - Implement AnyConnect IKEv2 VPNs on ASA and routers - Implement AnyConnect SSLVPN on ASA - Implement Clientless SSLVPN on ASA - Implement Flex VPN on routers |
| Site-to-site Virtual Private Networks on Routers and Firewalls | 15% | - Describe GETVPN - Describe uses of DMVPN - Describe uses of FlexVPN |
Cisco 300-730 certification is part of the Cisco Certified Network Professional (CCNP) Security track. It is a valuable certification for IT professionals who want to advance their careers in network security and secure networking. Implementing Secure Solutions with Virtual Private Networks certification is recognized globally and demonstrates a candidate's proficiency in implementing secure VPN solutions using Cisco technologies. It also provides a competitive edge in the job market and opens up new opportunities for career growth and advancement.
NEW QUESTION # 110
Which method dynamically installs the network routes for remote tunnel endpoints?
- A. CEF
- B. policy-based routing
- C. route filtering
- D. reverse route injection
Answer: D
Explanation:
Section: Site-to-site Virtual Private Networks on Routers and Firewalls Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnav/configuration/12-4t/sec-vpn- availability-12-4t-book/sec-rev-rte-inject.html
NEW QUESTION # 111
Refer to the exhibit.
Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?
- A. address-pool
- B. tunnel-group
- C. group-policy
- D. group-alias
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/ administration/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html
NEW QUESTION # 112
Which command is used to troubleshoot an IPv6 FlexVPN spoke-to-hub connectivity failure?
- A. show crypto identity
- B. show crypto gkm
- C. show crypto isakmp sa
- D. show crypto ikev2 sa
Answer: D
NEW QUESTION # 113
A network engineer has set up a FlexVPN server to terminate multiple FlexVPN clients. The VPN tunnels are established without issue. However, when a Change of Authorization is issued by the RADIUS server, the FlexVPN server does not update the authorization of connected FlexVPN clients. Which action resolves this issue?
- A. Fix the RADIUS key mismatch between the RADIUS server and FlexVPN clients.
- B. Fix the RADIUS key mismatch between the RADIUS server and FlexVPN server.
- C. Add the aaa server radius dynamic-author command on the FlexVPN clients.
- D. Add the aaa server radius dynamic-author command on the FlexVPN server.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/xe-16-10/sec-flex-vpn-xe-16-10-book/sec-ikev2-flex-coa.html
NEW QUESTION # 114
Refer to the exhibit.
Which two tunnel types produce the show crypto ipsec sa output seen in the exhibit? (Choose two.)
- A. FlexVPN
- B. VTI
- C. crypto map
- D. DMVPN
- E. GRE
Answer: B,D
NEW QUESTION # 115
Refer to the exhibit.
What is a result of this configuration?
- A. Spoke 2 fails the authentication because the remote authentication method is incorrect.
- B. Spoke 1 fails the authentication because the authentication methods are incorrect.
- C. Spoke 2 passes the authentication to the hub and successfully proceeds to phase 2.
- D. Spoke 1 passes the authentication to the hub and successfully proceeds to phase 2.
Answer: B
NEW QUESTION # 116
Refer to the exhibit. The network security engineer identified that the hub router cannot send traffic to the spoke router. Based on the provided output, which action resolves the issue?
- A. Correct the next hop server IP address on the spoke router.
- B. Ensure the preshared key on the hub-and-spoke router matches.
- C. Adjust the ip nhrp network-id command on the hub router.
- D. Permit UDP ports 500 and 4500 between the hub and spoke.
Answer: A
NEW QUESTION # 117
Refer to the exhibit.
Users cannot connect via AnyConnect SSLVPN. Which action resolves this issue?
- A. Configure the ASA to act as a DHCP server.
- B. Add an IPsec preshared key to the group policy.
- C. Configure the HTTP server to listen on port 443.
- D. Add ssl-client to the allowed list of VPN protocols.
Answer: D
NEW QUESTION # 118
Refer to the exhibit.
A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?
- A. An authentication failure occurs on the remote peer.
- B. An authentication failure occurs on the router.
- C. A certificate fragmentation issue occurs between both sides.
- D. UDP 4500 traffic from the peer does not reach the router.
Answer: D
NEW QUESTION # 119
What are two purposes of the key server in Cisco IOS GETVPN? (Choose two.)
- A. to download encryption keys
- B. to encrypt data traffic
- C. to maintain encryption policies
- D. to authenticate group members
- E. to distribute routing information
Answer: C,D
NEW QUESTION # 120
Refer to the exhibit.
Which type of VPN implementation is displayed?
- A. IKEv1 cluster
- B. IKEv2 load balancer
- C. IKEv2 reconnect
- D. IKEv2 backup gateway
Answer: B
NEW QUESTION # 121
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. preshared key
- B. transform set
- C. Phase 1 policy
- D. crypto access list
Answer: A
Explanation:
IKE Message from X.X.X.X Failed its Sanity Check or is Malformed
This debug error appears if the pre-shared keys on the peers do not match. In order to fix this issue, check the pre-shared keys on both sides.
1d00H:%CRPTO-4-IKMP_BAD_MESSAGE: IKE message from 198.51.100.1 failed its sanity check or is malformed
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/5409-ipsec-debug-00.html#anc17
NEW QUESTION # 122
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?
- A. ip nhrp redirect
- B. interface virtual-access
- C. interface virtual-template
- D. interface tunnel
Answer: C
NEW QUESTION # 123
An administrator is setting up Cisco AnyConnect on a Cisco ASA with the requirement that AnyConnect automatically establishes a VPN when a company-owned laptop is connected to the internet outside of the corporate network. Which configuration meets these requirements?
- A. SBL with machine certificate authentication
- B. SBL with user certificate authentication
- C. TND with user certificate authentication
- D. TND with machine certificate authentication
Answer: D
Explanation:
Trusted Network Detection (TND) gives you the ability to have AnyConnect automatically disconnect a VPN connection when the user is inside the corporate network (the trusted network) and start the VPN connection when the user is outside the corporate network (the untrusted network).
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/administrati on/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html#id_100236
NEW QUESTION # 124
What are two functions of ECDH and ECDSA? (Choose two.)
- A. digital signature
- B. encryption
- C. nonrepudiation
- D. key exchange
- E. revocation
Answer: A,D
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://tools.cisco.com/security/center/resources/next_generation_cryptography
NEW QUESTION # 125
Where is split tunneling defined for IKEv2 remote access clients on a Cisco router?
- A. virtual template
- B. IKEv2 authorization policy
- C. Group Policy
- D. webvpn context
Answer: C
Explanation:
Section: Secure Communications Architectures
NEW QUESTION # 126
A network engineer is setting up a clientless SSLVPN on a Cisco ASA. Remote users must be able to access an internal webserver via the URL example.com. Which two steps accomplish this task? (Choose two.)
- A. Configure a browser plugin on the Cisco ASA.
- B. Configure routing so that the user's computer can reach the webserver.
- C. Configure routing so that the Cisco ASA can reach the webserver.
- D. Configure a bookmark for the webserver.
- E. Configure a DNS server that can resolve the webserver URL.
Answer: D,E
NEW QUESTION # 127
Refer to the exhibit.
The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: B
NEW QUESTION # 128
A Cisco ASA is configured in active/standby mode. What is needed to ensure that Cisco AnyConnect users can connect after a failover event?
- A. AnyConnect images must be uploaded to both failover ASA devices.
- B. The vpnsession-db must be cleared manually.
- C. Configure a backup server in the XML profile.
- D. AnyConnect client must point to the standby IP address.
Answer: A
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ ha_active_standby.html
NEW QUESTION # 129
Refer to the exhibit.
A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?
- A. An authentication failure occurs on the remote peer.
- B. An authentication failure occurs on the router.
- C. A certificate fragmentation issue occurs between both sides.
- D. UDP 4500 traffic from the peer does not reach the router.
Answer: D
NEW QUESTION # 130
Refer to the exhibit.
VPN tunnels between a spoke and two DMVPN hubs are not coming up. The network administrator has verified that the encryption, hashing, and DH group proposals for Phase 1 and Phase 2 match on both ends. What is the solution to this issue?
- A. Enable shared tunnel protection.
- B. Ensure bidirectional UDP 500/4500 traffic.
- C. Increase the isakmp phase 1 lifetime.
- D. Add NAT statements for VPN traffic.
Answer: B
NEW QUESTION # 131
Which parameter is initially used to elect the primary key server from a group of key servers?
- A. lowest IP address
- B. highest IP address
- C. code version
- D. highest-priority value
Answer: D
Explanation:
https://www.cisco.com/c/en/us/products/collateral/security/group-encrypted-transport- vpn/deployment_guide_c07_554713.html
NEW QUESTION # 132
......
300-730 are Available for Instant Access: https://www.practicedump.com/300-730_actualtests.html
300-730 Dumps 2024 - New Cisco 300-730 Exam Questions: https://drive.google.com/open?id=1xCOyAia3rHizNNTjtPw5YTK_phpLUhIj