Quickly and Easily Pass F5 Exam with 301a real Dumps Updated on Oct-2024
Realistic 301a Dumps Questions To Gain Brilliant Result
F5 301a exam is an essential certification for IT professionals interested in working with F5 BIG-IP LTM solutions. BIG-IP LTM Specialist: Architect Set-Up & Deploy certification recognizes the skills and knowledge of candidates in designing, deploying, and managing F5 BIG-IP LTM solutions. With the right training and preparation, professionals can improve their career prospects and contribute to the success of their organizations.
NEW QUESTION # 11
Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?
- A. Least Connections
- B. Ratio
- C. Least Sessions
- D. Predictive
Answer: D
NEW QUESTION # 12
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?
- A. ...SECURITY CERTIFICATE....
- B. ...BEGIN CERTIFICATE....
- C. --START CERTIFICATE....
- D. ...SSL CERTIFICATE....
Answer: B
NEW QUESTION # 13
An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP device to the device group. The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?
- A. HA Capacity
- B. Load Aware
- C. HA Group
- D. Ordered List
Answer: D
NEW QUESTION # 14
An LTM Specialist needs to deploy a virtual server that will load balance traffic targeting https://register.example.com to a set of three web servers. Persistence needs to be ensured. No persistence mirroring is allowed SSL offloading is required.
A fourth web server with fewer resources will be used to handle requests from engine bots to https://register.example.comvrobots.txt by an iRule. The (Rule will use the HTTP_REQUEST event. .
What are the required profile and persistence settings to implement this
- A. tcp, clientssl, http, serverssl cookie persistence
- B. tcp, clientssl, serverssl, ssl persistence
- C. tcp. dientssl, hup, source address persistence
- D. tcp, clientssl, http. cookie persistence
Answer: D
Explanation:
The option is wrong, it should be clientssl and serverssl. If the title requires ssl offload instead of encryption, you need clientssl instead of serverssl. irule needs HTTP profile to enable HTTP_REQUEST. If the session cannot be mirrored, the cookie session remains to meet the demand.
NEW QUESTION # 15
While working with a web developer, it is determined that additional logic is required to assess the pool member availability.
Which two monitor types should be used in this scenario? (Choose two)
- A. TCP
- B. Scripted
- C. Gateway ICMP
- D. External
- E. TCP Echo
Answer: B,D
NEW QUESTION # 16
An LTM device needs an additional traffic group.
Which configuration item is required?
- A. Auto Fallback Timeout
- B. MAC Masquerade Address
- C. Group name
- D. Default device
Answer: C
NEW QUESTION # 17
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
- B. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.
- C. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- D. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
Answer: C
NEW QUESTION # 18
An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.
Which two server type should be used? (Choose two.)
- A. Stateless
- B. Internal
- C. Standard
- D. Performance HTTP
- E. Forwarding IP
Answer: B,C
NEW QUESTION # 19
An LTM Specialist is configuring a new virtual server on an LTM device and assigning a SNAT pool that is already is use another virtual server. Both virtual servers use the same pool members to load balance traffic. A maximum of 35,000 users needs to be able to access each virtual server ta any time. The network architecture does NOT allow the backend servers to use the LTM device as a default gateway.
What is the minimum number of SNAT addresses required in the SNAT pool to meet the needs of the virtual servers?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Both vs share the same snat pool, and both use the same pool member. Then the concurrent number of snatpool will be added. For each VS, there is a maximum of 35,000 users, and those two VSs have a maximum of 70,000 users. The stem did not mention how many connections each user would have concurrently. Calculated with a minimum of 1 connection, then 70,000 connections would be concurrent. One IP can support 65,535 connection. Therefore, at least 2 or more snaptips are required
NEW QUESTION # 20
TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich, Which health monitor setting should be used to verify that the firewalls are able to forward traffic?
- A. Transparent
- B. Up internal
- C. Adaptive
- D. Reverse
Answer: A
Explanation:
Sandwich architect firewalls are generally deployed transparently. You can enable Transparent to point to the next-hop address of the firewall and associate it with the firewall pool member for detection.
NEW QUESTION # 21
An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.
Which virtual server type should the LTM Specialist use?
- A. Forwarding (IP)
- B. Stateless
- C. Standard
- D. Performance (HTTP)
- E. Performance
Answer: C
NEW QUESTION # 22
Consider the monitor configuration displayed below.
What is the status of a pool member that responds with ''200 OK''?
- A. down
- B. available
- C. disabled
- D. unknown
Answer: A
NEW QUESTION # 23
A BIG IP device delivers the online shopping website https://shop.example.com. Two pool members handle the traffic. An iRule directs requests with the hip parameter "environment=development" to a third pool member for a staging environment.
Which combination of profiles is needed at minimum?
- A. http, clientssl, persistence
- B. tcp, clientssl, serverssl
- C. tcp, http, request logging
- D. tcp, http, clientssl
Answer: D
NEW QUESTION # 24
An LTM Specialist is configuring a client profile to offload processing a new application Company policy requires that clients can resume session for up to 30 minutes, but must renegotiate a new session after that.
Which setting should the LTM Specialist change to satisfy this requirement?
- A. Renegotiate Max Record Delay
- B. Cache size
- C. Cache timeout
- D. Renegotiation period
Answer: C
Explanation:
Question stem requires that you can resume SSL session within 30 minutes, then you need to define the ssl cache time in 30 minutes
NEW QUESTION # 25
An TLM Specialist has an Exchange that must use the LTM device to route traffic to the internet.
Which SNAT/NAT configure allows the Exchange server's traffic access the internet through the LTM device?
- A. SNAT List
- B. SNAT Automap
- C. NAT
- D. SNAT Pool
Answer: A
NEW QUESTION # 26
A custom TCP application using a single server is being migrated to the LTM device. A server is being added to the pool. The application is known to violate the TCP protocol RFC. The application currently works without error from a user perspective.
Which virtual server type is appropriate in this situation?
- A. Performance (Layer 4)-pure layer A forwarding
- B. Stateless TCP protocol is not applicable
- C. Standard-tcp profile exists, RFC verification will be performed
- D. forwarding (Layer 2) pure routing forwarding, pool cannot be specified
Answer: A
NEW QUESTION # 27
A virtual server is experiencing intermittent port exhaustion. What should be done to fix this issue?
- A. enable advanced routing
- B. enable SNAT automap
- C. add more pool members
- D. add more SNAT addresses
Answer: D
NEW QUESTION # 28
......
F5 301a certification exam is designed to test the knowledge and skills of IT professionals who specialize in setting up and deploying BIG-IP Local Traffic Manager (LTM) systems. BIG-IP LTM Specialist: Architect Set-Up & Deploy certification is intended for individuals who work with F5 products and solutions on a daily basis, and who are responsible for designing, deploying, and managing complex application delivery networks.
Start your 301a Exam Questions Preparation: https://www.practicedump.com/301a_actualtests.html
A Fully Updated 301a Exam Dumps - PDF Questions and Testing Engine: https://drive.google.com/open?id=180DMdYAhImboCJrxgN69H5-ouQgXj_gR