[Sep 20, 2021] 301a PDF Dumps is essential on your 301a Exam Questions Certain Success!
301a PDF Questions - Perfect Prospect To Go With 301a Practice Exam
NEW QUESTION 68
Two LTM devices must be manually configured to restrict in the same Device Group.
What is the correct order of steps to meet this requirement?
- A. Configure VLAN, Configure Self-IPs, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group.
- B. Configure Self-IPs, Configure VLAN, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group
- C. Configure VLAN, Configure-Sync IP, Configure Failover type, Establish Device Trust, Sync Device Trust, Create type, Establish Device Sync Device Trust, Create Device Group.
- D. Configure VLAN, Configure Config-Sync IP. Configure Self-IPs. Configure Failover type. Establish Device Trust, Create Device Group
Answer: A
NEW QUESTION 69
Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?
- A. Least Connections
- B. Least Sessions
- C. Predictive
- D. Ratio
Answer: C
NEW QUESTION 70
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
- A. The HA network is not configured for mirroring.
- B. The HA network is using the default routing domain.
- C. The HA network latency is too high.
- D. The HA network is using multicast IP.
Answer: D
Explanation:
NEW QUESTION 71
Remote office users are having performance issues with a virtual hosted on the F5 LTM. The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.
Which profile should the LTM Specialist enable to improve virtual server performance?
- A. A WAN optimized client side profile
- B. An HTTP profile for the virtual server
- C. A Stream profile for the remote user networks
- D. A FastL4 profile on the virtual server
Answer: A
Explanation:
They key word is that there are performance problem with Remote office users, no F5. The user experience can be improved through tcp optimization. The expression should be wom-tcp-wan-optimized in Protocol Profile (Client)
NEW QUESTION 72
A company plans to launch a huge marketing campaign and expects increase demand of their secure website. With the current virtual server setup, the LTM Specialist expects that the LTM device will reach its capacity limits. For the wen application to function properly. Cookies persistence is required. The LTM Specialist needs to reduce LTM device load without breaking the application.
Which two settings should the LTM Specialist modify to meet the requirement? (Choose two.)
- A. Remove ClientSSL profile
- B. Remove HTTP profile
- C. Modify virtual Server type to performance (Layer 4)
- D. Remove HTTP compression profile
- E. Remove web acceleration profile.
Answer: D,E
Explanation:
It is required that cookie persist must be used and http profile must be used, and SSL offloading must also be required. It must be in standard mode, excluding BD E.
NEW QUESTION 73
An LTM device configuration is as shown:
An LTM device configuration is as shown
What should be the two expected outcomes based on this configuration? (Choose two.)
- A. A client session that has been idle for 16 minutes will be sent to the same pool member
- B. A client session that has been idle for 12 minutes will be sent to the same pool member
- C. A client session that has been idle for 48 minutes will be sent to the same pool members
- D. A client session that has been idle for 14 minutes will be balanced to a new pool member
- E. A client session that has been idle for 20 minutes will be balanced to a new pool member
Answer: B,E
NEW QUESTION 74
An LTM Specialist discovers an issue with the custom http monitor that returns in a false positive status.
The end users cannot get the right website, but the http monitor marks the pool member UP.
What is causing the false positive result?
- A. The response is chunked.
- B. The end user should use another type of browser.
- C. The response is compressed.
- D. The Content-Type has value "iso-8859-200".
Answer: D
NEW QUESTION 75
An LTM Specialist is configuring a virtual server with an IP address.
Which configuration is unsupported?
- A. Performance 14 virtual server with an HTTP profile
- B. Standard virtual server with an HTTP profile
- C. Performance 14 virtual server with a FastHTTP profile
- D. Standard virtual server with a TCP profile
Answer: A
NEW QUESTION 76
Refer to the exhibit.
An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?
- A. {/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}
- B. {/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip
- C. {/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102 254)}
- D. {Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}
Answer: B
NEW QUESTION 77
An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual server.
What needs to be completed before applying that configuration change?
- A. Verify that the IP address of the SNAT pool are in the same VLAN as the pool members.
SNAT does not need to in the same vlan or same network segment as the pool member, as long as the route is reachable , excluding C and D he connection information of the SNAT pool to avoid port exhaustion under high concurrency - B. Make sure that the BIG-IP device is NOT operating under heavy load during peak times
- C. Verify that the IP address of the SNAT pool are in the same subnet as the pool members
- D. Review connection for the selected SNAT pool and enlarge it if appropriate
Answer: D
NEW QUESTION 78
An SSL application is being migrated to the LTM device. Both encrypted and unencrypted traffic are accepted by the server. The virtual server configuration is as follows:
Which LTM device profile should be used on the LTM device to reduce the CPU load on the current.
- A. stream
- B. Protocol
- C. serverssl
- D. clientsssl
Answer: D
NEW QUESTION 79
An LTM specialist needs to create a new account with the admin role called "newadmin' and access to all partitions.
Which tmsh command should be executed?
- A. create /users newadmin partition-access add {all-partitions {role admin JJ prompt for-password.
- B. create / sys user newadmin partition-access add (all-partitions {role admin )} prompt-for-password.
- C. create /user newadmin partition-access add (all-partitions {role admin }} prompt- for-password.
- D. create /auth user newadmin partition-access add {all-partitions {role admin }} prompt for-password.
Answer: D
Explanation:
Examining the use of commands, the creation of user is subordinate to auth
NEW QUESTION 80
An LTM Specialist is the administrator of an HA pair that contains two BIG IP units and one floating traffic group (TG1). A new project requires the creation of 30 virtual servers. The Specialist decides to create a new floating traffic group (TG2) to handle this requirement. Objects for this project created by the BIG-IP Managers must appears in the correct traffic group.
Which configuration should the LTM Specialist use to meet the requirement?
- A. Create a new partition and set the default traffic group to TG2
- B. Move the BIG-IP Managers from TG1 to TG2
- C. Restrict the Traffic Group Access of BIG-I Managers to TG2
- D. Modify the default traffic group of the Common partition to TG2
Answer: A
NEW QUESTION 81
An LTM Specialist needs to provide statistics regarding the round-trip time between the clients and the servers.
Which metric should be part of the analytics profile to provide that information?
- A. Page Load Time
- B. Response Codes
- C. User Sessions
- D. Max TPS and Throughout
Answer: A
NEW QUESTION 82
An application is making heavy use of a large, high-quality JPEG image file. An LTM Specialist needs to enhance page load times without increasing server load.
Which profile should be applied to the virtual server to perform this task?
- A. Response Adapt
- B. Web Acceleration
- C. OneConnect
- D. FastHTTP
Answer: B
NEW QUESTION 83
An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)
- A. a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address
- B. a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address
- C. a custom TCP monitor that works on port 8080
- D. a custom TCP monitor that works on port 9080,
- E. a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address
- F. a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address
Answer: C,F
NEW QUESTION 84
An unwanted IP address tries to connect to the configuration utility via Self IP An LTM Specialist needs to block the attempts based on the IP address.
How should the ITM Specialist block the attempts without affecting other users?
- A. Port lockdown
- B. Device trust
- C. SSH IP allow list
- D. Packet filter
Answer: D
NEW QUESTION 85
A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows:
Which action should be taken to correct this issue?
- A. add a TCP prone to the existing virtual server.
- B. change the profile set on the virtual server To TCP/UDP
- C. change the profile set on the virtual server to TCP
- D. create a new virtual server with the service port of 53 and the protocol set to TC
Answer: D
NEW QUESTION 86
......
301a Exam with Accurate BIG-IP LTM Specialist: Architect Set-Up & Deploy PDF Questions: https://www.practicedump.com/301a_actualtests.html
True F5 Exam Extraordinary Practice For the 301a Exam: https://drive.google.com/open?id=1FJYygaQySS9pbGen7_YixMDtI6Kj0wQi