2024 Best NSE6_FWF-6.4 Exam Preparation Material with New Dumps Questions
Free NSE6_FWF-6.4 Exam Files Verified & Correct Answers Downloaded Instantly
The NSE6_FWF-6.4 certification exam is intended for those who have a deep understanding of Fortinet's secure wireless LAN technologies and are keen to validate their skills. NSE6_FWF-6.4 exam tests the candidate's understanding of the configuration, management, and troubleshooting of Fortinet's secure wireless LAN solutions. Additionally, it evaluates the candidate's ability to integrate Fortinet's secure wireless LAN technologies with other security solutions.
Fortinet NSE6_FWF-6.4 certification exam is designed to test the knowledge and skills of network security professionals in deploying and managing secure wireless LAN solutions. Fortinet NSE 6 - Secure Wireless LAN 6.4 certification is aimed at individuals who are responsible for configuring, monitoring, and troubleshooting secure wireless networks in a variety of environments, including small and medium-sized businesses, enterprise networks, and service provider networks.
NEW QUESTION # 21
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user purchase activity
- B. Provides real-time insight into user online activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user movements
Answer: C
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION # 22
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Create a new FortiAP profile and change the county code settings on the profile
- B. Clone a suitable FortiAP profile and change the county code settings on the profile
- C. Configure the controller for the correct country code for Germany
- D. Configure the APs individually by overriding the settings in Managed FortiAPs
Answer: B
NEW QUESTION # 23
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and Io devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Reduce the number of wireless networks being broadcast by the AP
- B. Install another AP in the reception area to improve available bandwidth
- C. Increase the transmission power of the AP radios
- D. Enable frequency handoff on the AP to band steer clients
Answer: D
NEW QUESTION # 24
What type of design model does FortiPlanner use in wireless design project?
- A. Integration model
- B. Architectural model
- C. Analytical model
- D. Predictive model
Answer: D
Explanation:
Explanation
FortiPlanner is a wireless network planning and deployment tool that helps to design and optimize wireless networks based on various parameters, such as floor plans, AP models, coverage areas, and client density.
FortiPlanner uses a predictive model in wireless design projects, which means that it estimates the wireless coverage and performance based on mathematical calculations and simulations, without requiring any physical measurements or site surveys. References: FortiOS 6.4.0 Handbook - Wireless Controller, page 5;
[FortiPlanner User Guide], page 9.
NEW QUESTION # 25
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can support the connection of wireless clients
- B. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- C. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- D. Background rogue scanning requires DARRP to be enabled on the AP instance
Answer: A,D
NEW QUESTION # 26
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Software security token authentication
- B. Hardware security token authentication
- C. Short message service authentication
- D. Social networks authentication
Answer: C,D
Explanation:
Explanation
According to the web search results, FortiPresence supports social networks authentication and short message service authentication as public authentication services for guest Wi-Fi access. Social networks authentication allows visitors to log in using their existing social media accounts, such as Facebook, Twitter, LinkedIn, Google, and Instagram. Short message service authentication allows visitors to receive a one-time password via SMS to their mobile phone number. These authentication methods are convenient and secure for visitors and provide valuable data for businesses. Software security token authentication and hardware security token authentication are not supported by FortiPresence as public authentication services for guest Wi-Fi access.
References: Configuring Captive Portal | FortiPresence 1.2.0, Configuring Captive Portal | FortiPresence
22.4.0
NEW QUESTION # 27
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- B. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
- C. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- D. Areas with the signal strength weaker than -68 dB are cut out of the map
Answer: A
NEW QUESTION # 28
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Reduce the number of wireless networks being broadcast by the AP
- B. Install another AP in the reception area to improve available bandwidth
- C. Increase the transmission power of the AP radios
- D. Enable frequency handoff on the AP to band steer clients
Answer: D
NEW QUESTION # 29
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: C
NEW QUESTION # 30
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. The new network must be manually assigned to a FortiAP profile.
- B. The wireless network interface must be assigned a Layer 3 address
- C. The wireless network to Internet firewall policy must be configured
- D. Security Fabric and HTTPS must be enabled on the wireless network interface
Answer: C
Explanation:
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
NEW QUESTION # 31
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Hardware selection phase
- B. Site survey phase
- C. Project information phase
- D. Installation phase
Answer: B,C
Explanation:
Explanation
According to the web search results, the project information phase and the site survey phase are part of the process to plan a wireless design project. The project information phase involves defining the project scope, objectives, requirements, deliverables, and stakeholders. It also includes creating a project plan, a risk management plan, a communication plan, and a budget.1 The site survey phase involves conducting a physical inspection of the site where the wireless network will be deployed, measuring the signal strength and interference levels, identifying the optimal locations for the access points and antennas, and validating the network performance and coverage.2 The hardware selection phase and the installation phase are not part of the planning process, but rather part of the implementation process. The hardware selection phase involves choosing the appropriate wireless devices, such as access points, routers, switches, controllers, and cables, based on the network design and specifications.3 The installation phase involves installing, configuring, testing, and documenting the wireless network components according to the project plan and best practices.3 References: Wireless Device Network Planning and Design - Emerson, Telecommunications and Implementation Project Management - BICSI, Project Planning | Wireless Design Services | Digi International
NEW QUESTION # 32
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Static
- B. Broadcast
- C. DHCP
- D. Multicast
Answer: A
NEW QUESTION # 33
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the AP CLI, using the cw_diag -d sta command
- B. On the AP CLI, using the cw_diag ksta command
- C. On the controller CLI, using the WiFi Client monitor
- D. On the controller CLI, using the diag wireless-controller wlac -d sta command
Answer: B
NEW QUESTION # 34
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?
- A. Enable Radio resource provisioning on the relevant AP profiles.
- B. Ensure that all allowed channels are enabled for the AP radios.
- C. Enable Locate WiFi clients when not connected in the relevant AP profiles.
- D. Enable Monitor channel utilization on the relevant AP profiles.
Answer: A
Explanation:
The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.
NEW QUESTION # 35
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the AP CLI, using the cw_diag -d sta command
- C. On the controller CLI, using the WiFi Client monitor
- D. On the AP CLI, using the cw_diag ksta command
Answer: A
NEW QUESTION # 36
Which two statements about background rogue scanning are correct? (Choose two.)
- A. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- B. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- C. A dedicated radio configured for background scanning can support the connection of wireless clients
- D. Background rogue scanning requires DARRP to be enabled on the AP instance
Answer: A,D
NEW QUESTION # 37
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that cannot be used because of regulatory channel restrictions
- C. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: C
Explanation:
Explanation
This frequencies are also used by other licensed applications, wireless LANs have to use a specific method to gain access to certain higher frequencies and this method is known as DFS.
NEW QUESTION # 38
......
Fortinet NSE6_FWF-6.4 exam is an essential certification for professionals who want to demonstrate their expertise in securing wireless networks. Fortinet NSE 6 - Secure Wireless LAN 6.4 certification not only validates the candidate's knowledge of Fortinet products but also verifies their ability to design and implement secure wireless networks. Fortinet NSE 6 - Secure Wireless LAN 6.4 certification enhances the candidate's chances of getting job opportunities and career growth in the field of wireless network security.
Instant Download NSE6_FWF-6.4 Dumps Q&As Provide PDF&Test Engine: https://www.practicedump.com/NSE6_FWF-6.4_actualtests.html
Fast Exam Updates NSE6_FWF-6.4 dumps with PDF Test Engine Practice: https://drive.google.com/open?id=1nl8WtC2BOcjIXjSTl3Nq-C4fnIQjUNsG