Easily To Pass New Fortinet NSE6_FWF-6.4 Dumps with 30 Questions
Latest NSE6_FWF-6.4 Study Guides 2021 - With Test Engine PDF
NEW QUESTION 15
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- B. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- C. Indicates channels that cannot be used because of regulatory channel restrictions
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: B
NEW QUESTION 16
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?
- A. Enable Monitor channel utilization on the relevant AP profiles.
- B. Ensure that all allowed channels are enabled for the AP radios.
- C. Enable Radio resource provisioning on the relevant AP profiles.
- D. Enable Locate WiFi clients when not connected in the relevant AP profiles.
Answer: C
Explanation:
The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.
NEW QUESTION 17
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. AP Manager
- B. FortiAP Cloud
- C. FortiSwitch
- D. FortiGate
Answer: B,D
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION 18
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Clone a suitable FortiAP profile and change the county code settings on the profile
- B. Configure the APs individually by overriding the settings in Managed FortiAPs
- C. Configure the controller for the correct country code for Germany
- D. Create a new FortiAP profile and change the county code settings on the profile
Answer: A
NEW QUESTION 19
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- B. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- C. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- D. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
Answer: B
Explanation:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION 20
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
- A. Configure a tunnel mode wireless network and enable split tunneling to the local network
- B. Configure a bridge mode wireless network and enable the Local standalone configuration option
- C. Configure a bridge mode wireless network and enable the Local authentication configuration option
- D. Install supported FortiAP and configure a bridge mode wireless network
Answer: A
NEW QUESTION 21
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Increase the transmission power of the AP radios
- B. Reduce the number of wireless networks being broadcast by the AP
- C. Enable frequency handoff on the AP to band steer clients
- D. Install another AP in the reception area to improve available bandwidth
Answer: A
NEW QUESTION 22
Which statement is correct about security profiles on FortiAP devices?
- A. FortiGate performs inspection the wireless traffic
- B. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
- C. Disable DTLS on FortiAP
- D. Only bridge mode SSIDs can apply the security profiles
Answer: D
NEW QUESTION 23
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. Data channels
- B. Control channels
- C. FortLink channels
- D. Security channels
Answer: A,B
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION 24
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Preauthorize APs
- B. Create a custom AP profile
- C. Set the wireless controller country setting
- D. Create wireless LAN specific policies
Answer: B
NEW QUESTION 25
Which two statements about background rogue scanning are correct? (Choose two.)
- A. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. Background rogue scanning requires DARRP to be enabled on the AP instance
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
Answer: A,D
Explanation:
To enable rogue AP scanning
NEW QUESTION 26
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 personal wireless network
- B. An X.509 certificate to authenticate the client
- C. A WPA2 or WPA3 Enterprise wireless network
- D. An X.509 to authenticate the authentication server
- E. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
Answer: B,D
NEW QUESTION 27
......
NSE6_FWF-6.4 Dumps and Exam Test Engine: https://www.practicedump.com/NSE6_FWF-6.4_actualtests.html
Get New NSE6_FWF-6.4 Practice Test Questions Answers : https://drive.google.com/open?id=1U5BZnCQB7nmRvQVhaEXyBjUrN5wJ9ZIL