Attested NSE6_FWF-6.4 Dumps PDF Resource [2021]
Latest NSE6_FWF-6.4 Actual Free Exam Questions Updated 30 Questions
NEW QUESTION 12
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. AP Manager
- B. FortiAP Cloud
- C. FortiGate
- D. FortiSwitch
Answer: B,C
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION 13
Which statement is correct about security profiles on FortiAP devices?
- A. Only bridge mode SSIDs can apply the security profiles
- B. Disable DTLS on FortiAP
- C. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
- D. FortiGate performs inspection the wireless traffic
Answer: A
NEW QUESTION 14
Which two statements about background rogue scanning are correct? (Choose two.)
- A. Background rogue scanning requires DARRP to be enabled on the AP instance
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
Answer: C,D
Explanation:
To enable rogue AP scanning
NEW QUESTION 15
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Increase the transmission power of the AP radios
- B. Enable frequency handoff on the AP to band steer clients
- C. Reduce the number of wireless networks being broadcast by the AP
- D. Install another AP in the reception area to improve available bandwidth
Answer: A
NEW QUESTION 16
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- B. For both interfaces in the wtp-profile, configure vap-all to be manual
- C. Disable intra-vap-privacy for the Authors vap-wireless network
- D. Increase the transmission power of the AP radio interfaces
Answer: B,C
NEW QUESTION 17
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: B,D
NEW QUESTION 18
Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?
- A. HTTPS
- B. SSH
- C. FortiTelemetry
- D. Security Fabric
Answer: D
NEW QUESTION 19
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 Enterprise wireless network
- B. An X.509 to authenticate the authentication server
- C. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
- D. An X.509 certificate to authenticate the client
- E. A WPA2 or WPA3 personal wireless network
Answer: B,D
NEW QUESTION 20
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the AP CLI, using the cw_diag -d sta command
- C. On the controller CLI, using the WiFi Client monitor
- D. On the AP CLI, using the cw_diag ksta command
Answer: A
NEW QUESTION 21
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Create a new FortiAP profile and change the county code settings on the profile
- B. Clone a suitable FortiAP profile and change the county code settings on the profile
- C. Configure the APs individually by overriding the settings in Managed FortiAPs
- D. Configure the controller for the correct country code for Germany
Answer: B
NEW QUESTION 22
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- C. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
- D. Indicates channels that cannot be used because of regulatory channel restrictions
Answer: A
NEW QUESTION 23
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. Security Fabric and HTTPS must be enabled on the wireless network interface
- B. The new network must be manually assigned to a FortiAP profile.
- C. The wireless network interface must be assigned a Layer 3 address
- D. The wireless network to Internet firewall policy must be configured
Answer: D
Explanation:
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
NEW QUESTION 24
......
NSE6_FWF-6.4 Certification Overview Latest NSE6_FWF-6.4 PDF Dumps: https://www.practicedump.com/NSE6_FWF-6.4_actualtests.html
Free NSE6_FWF-6.4 Exam Braindumps certification guide Q&A: https://drive.google.com/open?id=1U5BZnCQB7nmRvQVhaEXyBjUrN5wJ9ZIL